Key Features
- DIN 43650 Form A
- PG6 Cable Entry
- Suitable for 4–6mm Cable
- 0–250V AC/DC
- 16A Maximum Current
- No Internal Circuit
- Standard 28mm Square
- EN 175301-803 / ISO 4400
- IP65 Protection
- Solenoid Valve Connector
Datasheets
Description
DIN 43650 Form A Connector PG6 4–6mm Cable – IP65
DIN 43650 Form A electrical connector with PG6 cable entry for 4–6mm diameter cable, designed for electrical connection to compatible solenoid valves, solenoid coils and industrial control equipment.
Manufactured to the standard EN 175301-803 / DIN 43650A / ISO 4400 Form A 28mm square connection, this version is supplied without an internal electrical circuit, making it suitable for general-purpose AC and DC solenoid valve applications where LED indication or electrical suppression is not required.
Rated for 0–250V AC/DC with a maximum current of 16A, the connector provides a simple and economical IP65 electrical connection.
The compact PG6 cable entry accepts 4–6mm diameter cable, making this version particularly suitable for installations using smaller control cables.
Technical Specification
Connector type: DIN Form A
Standard: EN 175301-803
Alternative standards: DIN 43650A / ISO 4400
Connector size: 28mm square
Cable entry: PG6
Suitable cable diameter: 4–6mm
Voltage range: 0–250V AC/DC
Maximum current: 16A
Circuit: None
Protection: IP65
PG6 Cable Entry – 4–6mm Cable
This version features a PG6 cable gland specifically suited to 4–6mm diameter electrical cable.
This distinguishes it from the larger cable-entry versions within the DIN Form A range:
✓ PG6 → 4–6mm cable
✓ PG9 → 6–8mm cable
✓ PG11 → 8–11mm cable
This makes selecting the correct connector straightforward according to the outside diameter of the customer's cable.
No Internal Circuit
The connector is supplied without an internal electrical circuit.
It contains no:
✓ LED status indicator
✓ VDR varistor
✓ TVS suppressor
✓ Bridge rectifier
✓ PWM energy-saving circuit
It therefore provides a straightforward electrical connection between the incoming cable and compatible DIN Form A solenoid coil.
0–250V AC/DC Operation
Voltage range: 0–250V AC/DC
Maximum current: 16A
Because the connector contains no voltage-specific electronic circuitry, it can be used with a wide range of compatible AC and DC solenoid coils.
The actual supply voltage must always correspond with the rated voltage of the connected solenoid coil.
DIN 43650A Form A Connection
The standard DIN 43650A / EN 175301-803 Form A interface is widely used across industrial solenoid valves and coils.
The 28mm square format makes this connector suitable for compatible:
✓ Pneumatic solenoid valves
✓ Hydraulic solenoid valves
✓ Water solenoid valves
✓ Process valves
✓ Gas and fluid control valves
✓ Industrial automation equipment
IP65 Protection
Protection rating: IP65
When correctly assembled to a compatible solenoid coil, the connector provides protection against dust ingress and water jets.
This makes it suitable for general industrial machinery, process control and automation applications.
Why Choose the PG6 Version?
The key advantage of this connector is its smaller 4–6mm cable capacity.
Where a standard PG9 connector is unnecessarily large for the selected control cable, the PG6 gland provides a more appropriate fit and helps achieve correct cable sealing.
It retains the standard DIN Form A interface, 0–250V AC/DC capability and 16A maximum rating while accommodating smaller-diameter cables.
Typical Applications
✓ Solenoid valves
✓ Solenoid coils
✓ Pneumatic systems
✓ Hydraulic equipment
✓ Water control systems
✓ Process control
✓ Industrial automation
✓ OEM machinery
✓ Packaging machinery
✓ Pumps and fluid systems
✓ Replacement DIN connectors
Choosing the Correct DIN Connector Cable Entry
PG6 – 4–6mm cable
Best suited to smaller control and instrumentation cables.
PG9 – 6–8mm cable
General-purpose size for many standard industrial cables.
PG11 – 8–11mm cable
Suitable for larger-diameter electrical cables.
Always select the cable gland according to the actual outside diameter of the cable rather than conductor size alone.
Why Choose This DIN Form A Connector?
This PG6 DIN Form A connector provides a simple and economical electrical connection for compatible industrial solenoid valves.
With 0–250V AC/DC operation, 16A maximum current and IP65 protection, it offers broad compatibility without unnecessary internal electronics.
The PG6 gland for 4–6mm cable makes it particularly suitable where smaller-diameter control cable is being used.
Related Products & Categories
Technical Specification
Brand: Nass Magnet GmbH
Model: DIN2-4/6mm-single
Width: 28.00 mm
Height: 31.00 mm
Depth: 28.00 mm
Weight: 0.10 kg
Body Material: Nylon
Seals: NBR
Approvals:: IP65
Spares (Coils, Connectors, Seals): DIN connector Form A
Found in these Categories
Electrical Connector 2P+E Form A PG6 (4-6mm) 0-250v IP65
£1.10 incl. VAT £0.92 ex. VAT
-23% Was £1.43 incl. VAT