Key Features
- DIN 43650 Form A Connector
- No Internal Circuit
- 0–250V AC/DC
- 16A Maximum Current
- PG11 Cable Entry
- Suitable for 8–11mm Cable
- Standard 28mm Square Format
- EN 175301-803 / ISO 4400
- Clear Connector Housing
- IP65 Protection
- Solenoid Valve Connection
- Industrial Electrical Connector
Description
DIN 43650 Form A Connector PG11 8–11mm Cable – IP65
DIN 43650 Form A electrical connector with large PG11 cable entry for 8–11mm diameter cable, designed for electrical connection of compatible solenoid valves, solenoid coils and industrial control equipment.
Manufactured to the standard EN 175301-803 Form A / DIN 43650A 28mm square connection, this version is supplied without an internal electrical circuit, making it suitable for general AC or DC solenoid valve applications where LED indication, rectification or surge suppression is not required.
Rated for 0–250V AC/DC and up to 16A maximum, the connector provides a simple and economical electrical connection with IP65 environmental protection.
Its key difference compared with standard PG9 versions is the larger PG11 cable entry, which accepts cables from 8–11mm diameter.
Technical Specification
Connector type: Form A
Standard: EN 175301-803
Alternative standard: DIN 43650A / ISO 4400
Connector size: 28mm square
Voltage range: 0–250V AC/DC
Maximum current: 16A
Circuit: None
Housing: Clear
Cable entry: PG11
Suitable cable diameter: 8–11mm
Protection: IP65
No Internal Circuit
This connector is supplied without an internal electrical circuit.
Unlike LED, VDR, TVS or bridge rectifier DIN connectors, it provides a straightforward electrical connection between the supply cable and compatible solenoid coil.
There is no:
✓ LED status indicator
✓ VDR varistor
✓ TVS suppressor
✓ Bridge rectifier
✓ Energy-saving circuit
This makes it suitable where a simple, general-purpose DIN Form A electrical connection is required.
0–250V AC/DC Operation
With no voltage-specific electronic components incorporated into the connector, it can be used with compatible electrical systems from 0 to 250V AC/DC.
This provides flexibility across common industrial solenoid valve voltages without requiring a different connector for each supply voltage.
The actual operating voltage must, of course, match the voltage rating of the connected solenoid coil.
16A Maximum Current
Maximum connector current rating: 16A
This provides ample current capacity for typical compatible industrial solenoid valve coils.
The actual permissible electrical load will also depend upon the connected cable, conductor size, coil and installation conditions.
Large PG11 Cable Entry
One of the main reasons to choose this version is its larger cable entry.
Cable gland: PG11
Suitable cable diameter: 8–11mm
This makes it particularly useful where a larger-diameter electrical cable is being used and a conventional PG9 DIN connector would not provide sufficient cable capacity.
DIN 43650A Form A Connection
The connector uses the widely adopted DIN 43650A / EN 175301-803 Form A interface.
The standard 28mm square format is commonly used on industrial solenoid coils for pneumatic, hydraulic and fluid-control valves.
This makes the connector suitable as a replacement or new installation connector for compatible DIN Form A coils.
IP65 Protection
Protection rating: IP65
When correctly assembled to a compatible solenoid coil, the IP65 enclosure provides protection against dust ingress and water jets.
This makes the connector suitable for general industrial installations where electrical connections may be exposed to dust, moisture or routine equipment cleaning.
Clear Housing
The connector features a clear housing, allowing the internal terminal area to remain visible.
This can be useful during installation and maintenance when checking the internal wiring and terminal connections.
Typical Applications
✓ Solenoid valves
✓ Solenoid coils
✓ Pneumatic valves
✓ Hydraulic valves
✓ Water control valves
✓ Process control equipment
✓ Industrial automation
✓ OEM machinery
✓ Pumps and fluid systems
✓ Packaging machinery
✓ General industrial equipment
✓ Replacement DIN connectors
PG11 vs PG9 DIN Connector
The main difference between this model and your standard no-circuit Form A connector is cable capacity.
PG9 version: 6–8mm cable
PG11 version: 8–11mm cable
Why Choose This PG11 DIN Connector?
This connector provides a straightforward and economical solution for connecting compatible DIN Form A solenoid valves where no additional electronic circuitry is required.
Its 0–250V AC/DC rating and 16A maximum current capacity make it suitable for a broad range of industrial applications, while the larger PG11 cable entry accepts 8–11mm cable.
For installations using heavier or larger-diameter cable that will not fit a conventional PG9 connector, this PG11 version provides the same standard DIN 43650 Form A interface with additional cable capacity.
Related Products & Categories
Technical Specification
Brand: Connexion
Model: DIN2-PG11
Width: 28.00 mm
Height: 31.00 mm
Depth: 28.00 mm
Weight: 0.10 kg
Body Material: Nylon
Voltage: 110vAC, 110vDC, 125vDC, 12vAC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 36vAC, 3vDC, 48vAC, 48vDC, 6vDC
Seals: NBR
Approvals:: IP65
Spares (Coils, Connectors, Seals): DIN connector Form A
DIN Connector Type: Field Wireable
DIN Connector Circuit: Without
DIN Connector Conduit / Cable Size: 8-11mm Cable
Found in these Categories
Electrical connector Form A PG11 (8-11mm) IP65 no circuit
£1.10 incl. VAT £0.92 ex. VAT
-23% Was £1.43 incl. VAT