Solenoid valve world

3/8 Stainless steel solenoid valve 0-7 Bar 2/2 Normally Closed (SPU220A-03) 13mm

£123.11

£151.87 incl. VAT
£102.59 ex. VAT

Brand: Shako Co Ltd

Model: SPU22003

Stock: 1 in stock

Read Full Description

Description

3/8 inch Stainless Steel solenoid valve Shako SPU220A-03
Function: 2/2 way normally closed
Operation: Assisted lift (zero-rated)
Port: 3/8 BSP, option NPT or Rc thread
Pressure: 0 to 7 Bar (AC) or 0 to 5 Bar (DC Voltage).
Body: 316 stainless steel
Internals: Stainless steel
Seals: Viton standard, option EPDM, NBR or HNBR
Shading ring: Copper, option silver shading ring or without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.
Orifice: 13.0mm
KV flow factor: 35 L/min based on water with 1 Bar pressure drop.
Media: air, water, 80% vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.
Media temperature: -10°C to +180°C with Viton seals, -15°C to +80°C NBR, -40°C to +150°C HNBR, -5°C to +130°C EPDM seal material.
Coil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A
Protection: IP65 with connector (Included)
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 0-3 Bar Max.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.
HS Code 8481 8059

Technical Specification

Brand: Shako Co Ltd

Model: SPU22003

Width: 48.00 mm

Height: 101.00 mm

Depth: 66.50 mm

Weight: 0.74 kg

Valve / Product Type: Solenoid

Body Material: Stainless Steel

Voltage: 12vDC, 24vDC, 24vAC, 36vAC, 48vAC, 48vDC, 110vAC, 110vDC, 230VAC, 200vDC, 380vAC

Port Size: 3/8 thread

Function: 2/2 Normally Closed

Operation: Assisted Lift

Pressure Maximum: 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar

Seals: EPDM, FKM (Viton), HNBR, NBR

Approvals: ATEX Zone II GD, ATEX Exm, IP65

Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)

Options required: Degreased, Shading Ring - Silver, Shading Ring - without

Orifice: 13mm