Description
1/8" High Pressure Brass Solenoid Valve – CS AD6000
CS Fluid Power Direct-Acting High Pressure Solenoid Valve
The CS Fluid Power AD6000 is a compact 1/8" direct-acting 2/2 way normally closed brass solenoid valve designed for high-pressure fluid and gas control applications.
Unlike conventional pilot-operated high-pressure valves, the direct-acting design requires no minimum pressure differential, allowing operation from 0 Bar and vacuum through to a maximum 150 Bar, depending on the selected coil and orifice.
Available with orifice sizes from 1.2mm to 5.0mm, the AD6000 combines a brass body with stainless steel internal components and a wide choice of sealing materials. PTFE sealing is available for the highest-pressure applications up to 150 Bar. The valve is suitable for air, water, gases, light oils and compatible fluids with viscosity up to 50 CST.
Key Features
✓ Direct-acting 2/2 way normally closed design
✓ Zero-pressure operation from 0 Bar
✓ No minimum pressure differential required
✓ Maximum working pressure up to 150 Bar
✓ High vacuum capability to 10⁻⁶ Torr
✓ Choice of 1.2mm, 1.6mm, 2mm, 3mm, 4mm or 5mm orifice
✓ Brass body with stainless steel internal components
✓ PTFE sealing available for pressures up to 150 Bar
✓ Opening and closing time ≤20 milliseconds
✓ Media viscosity up to 50 CST
✓ Mounting in any position
✓ WPG1, WPG2 or WPA3C coil options
✓ UL / CSA approved WPG coils as standard
✓ Class H 180°C insulation
✓ 100% continuous duty rated
✓ IP67 protection with DIN connector on WPG coils
✓ Optional manual override
✓ Optional silver shading ring
✓ Optional NPT thread
✓ Optional ATEX hazardous-area coil
Valve Function & Operation
Function: 2/2 way normally closed
Operation: Direct acting (zero rated)
Thread: 1/8" BSPP standard
Optional threads: NPT or Rc
Pressure range: 0 to 150 Bar maximum, depending on coil and orifice
Vacuum rating: Down to 10⁻⁶ Torr
Opening / closing time: ≤20 milliseconds
Mounting: Any position
No minimum pressure differential required
Orifice, Flow & Maximum Pressure
WPG1 coil
1.2mm → Kv 1.0 L/min → 60 Bar AC / 42 Bar DC
1.6mm → Kv 1.3 L/min → 40 Bar AC / 28 Bar DC
2.0mm → Kv 1.6 L/min → 20 Bar AC / 14 Bar DC
WPG2 coil
1.2mm → Kv 1.0 L/min → 120 Bar AC / 84 Bar DC
1.6mm → Kv 1.3 L/min → 60 Bar AC / 42 Bar DC
2.0mm → Kv 1.6 L/min → 30 Bar AC / 21 Bar DC
3.0mm → Kv 3.7 L/min → 20 Bar AC / 14 Bar DC
4.0mm → Kv 8.3 L/min → 12 Bar AC / 8.4 Bar DC
5.0mm → Kv 9.2 L/min → 10 Bar AC / 7 Bar DC
WPA3C coil
1.2mm → Kv 1.0 L/min → 150 Bar AC / 105 Bar DC
1.6mm → Kv 1.3 L/min → 80 Bar AC / 56 Bar DC
2.0mm → Kv 1.6 L/min → 60 Bar AC / 42 Bar DC
3.0mm → Kv 3.7 L/min → 40 Bar AC / 28 Bar DC
4.0mm → Kv 8.3 L/min → 20 Bar AC / 14 Bar DC
5.0mm → Kv 9.2 L/min → 15 Bar AC / 10.5 Bar DC
Construction & Materials
Body: Brass
Tube and spring: 304 stainless steel / brass
Armature: 430F stainless steel
Other internal components: Brass and stainless steel
Shading ring: Copper
Optional shading ring: Silver
Seals: NBR, EPDM, Silicone, FKM (Viton®), PTFE and other application-specific materials
Optional seals: VST, Neoprene, ECO, HNBR, Hypalon and Butyl (IIR)
Moulded coil: Resin
Media Compatibility
Air and inert gases
Water
Light oils
Compatible gases
Vacuum applications
Non-corrosive fluids compatible with brass and selected seal materials
Maximum viscosity: 50 CST
Temperature Limits
NBR: Up to +100°C
Silicone, EPDM and FKM: Up to +120°C
VST: Up to +180°C, maximum 30 Bar
PTFE: Up to +180°C and maximum 150 Bar
Ambient temperature: -10°C to +50°C
Important: maximum media temperature and pressure depend on the selected seal, coil and application.
Coil & Electrical
WPG1 Coil
Power: 12 Watt DC
AC consumption: 11.2 VA inrush / 8.2 VA holding
Connection: DIN 43650A
Protection: IP67 with connector fitted
Insulation: Class H 180°C
WPG2 Coil
Power: 18 Watt DC
AC consumption: 18.7 VA inrush / 15.3 VA holding
Connection: DIN 43650A
Protection: IP67 with connector fitted
Insulation: Class H 180°C
WPA3C Coil
Power: 22.6 Watt DC
AC consumption: 37.5 VA inrush / 27.5 VA holding
Connection: 30cm flying leads
Protection: IP54
Insulation: Class H 180°C
Duty cycle: 100% continuous rated
WPG1 and WPG2 coils are UL / CSA approved and supplied with IP67 DIN 43650A connector.
Voltage Options
DC: 12V or 24V
AC: 24V, 110V or 230V (50/60 Hz)
Voltage tolerance: -10% / +15%
Custom configurations available on request.
ATEX / IECEx Coil Option
Optional Nass Magnet explosion-protected solenoid operator available.
✓ Ex mb IIC T4 Gb
✓ Ex mb tb IIIC T130°C Db
✓ Suitable for Zone 1 gas and Zone 21 dust hazardous areas
✓ ATEX Category 2G / 2D
✓ Protection rating: IP65
✓ Maximum media temperature: +80°C
✓ ATEX Certificate: PTB 03 ATEX 2086 X
✓ IECEx Certificate: IECEx PTB 05.0005X
✓ ATEX Directive: 2014/34/EU
Maximum operating pressure with ATEX coil: equivalent to the applicable WPG1 12 Watt coil pressure rating.
Benefits
Direct-acting zero-pressure operation
High-pressure capability up to 150 Bar
Vacuum capable to 10⁻⁶ Torr
Extremely fast ≤20 millisecond response
Six orifice sizes for pressure and flow optimisation
Compact 1/8" brass construction
Wide choice of seal materials
PTFE option for pressures up to 150 Bar
UL / CSA approved WPG coils as standard
Optional manual override
Optional ATEX / IECEx hazardous-area version
Reliable continuous-duty operation
Fast UK delivery available
Special Options
Manual override option
Silver shading ring
NPT or Rc thread
Alternative seal materials
PTFE high-pressure sealing
ATEX / IECEx explosion-protected coil
Custom configurations available on request
Applications
High-pressure pneumatic systems
Pressure testing equipment
Vacuum systems
High-pressure gas control
Fuel and light oil control
Test rigs and instrumentation
OEM machinery
Compact hydraulic systems
Laboratory and process equipment
General industrial automation
Related Products & Categories
