Solenoid valve world

General Valves WRAS Natural Gas Wizard Ball Valves Pneumatics Contact Us

Home
Valves by media
Air and inert gas valves

Air and Inert Gas Valves

2, 3 and 5 way Solenoid valves and motor actuated valves for Compressed Air + Inert Gases manufactured from brass, stainless steel & plastic.

Filters

Price

Valve / Product Type

Air Actuated Valve0

air actuated valves that utilise a compressed air supply to operate.

Angle Seat Valve0

Angle seat piston valves, air actuated globe valves.

Ball Valve0

Motor and air actuated quarter turn 2+3 way ball valves

Coaxial Valve0

Motor Actuated 0

Proportional Modulating0

Flow regulating valves with manual or electric modulating 4-20mA control.

Solenoid Valve0

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

M30

M50

1/8 thread0

valves with 1/8 inch threaded ports

1/4 thread0

valves with 1/4 inch threaded ports

1/4 Push Fit 0

6mm0

3/8 thread0

valves with 3/8 inch threaded ports

3/8 Flange DN100

3/8 Push Fit0

1/2 thread0

valves with 1/2 inch threaded ports

1/2 inch Flange DN150

15mm0

3/4 thread0

valves with 3/4 inch threaded ports

3/4 Flange DN200

1 thread0

valves with 1 inch threaded ports

1 inch Flange DN250

11/4 thread0

valves with 11/4 inch threaded ports

11/4 inch Flange DN320

11/2 thread0

valves with 11/2 inch threaded ports

11/2 inch Flange DN400

2 thread0

valves with 2 inch threaded ports

2 inch Flange DN500

21/2 thread0

valves with 21/2 inch threaded ports

21/2 inch Flange DN65 0

3 thread0

valves with 3 inch threaded ports

3 inch Flange DN80 0

4 inch Flange DN100 0

Namur mount0

valves with Namur interface mounting

Sub Base Mount0

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Fluid (Stong Acid/Alkali)0

Fluid Thick 51>500cSt0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Gases (Strong Acid/Alkali)0

Oils + Fuels 50cSt Max0

Steam0

Vacuum (Low)0

Vacuum (Medium)0

Vacuum (High)0

Water0

Water (RO/Pure/Demin)0

Body Material

Aluminium0

Brass0

Bronze0

Cast Iron0

Delrin (POM)0

Nylon0

Steel0

Stainless Steel0

Function

2/2 Normally Closed0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Normally Open0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Latching0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - short power pulse valve stays open - reverse power pulse valve stays closed

3/2 Normally Closed0

3 ports with 2 positions. Power off inlet closed, outlet open to exhaust - power on inlet open to outlet with exhaust closed.

3/2 Normally Open0

3 ports 2 positions. Inlet open to outlet with exhaust closed - power on inlet closed with outlet open to exhaust.

3/2 Universal0

3 ports, 2 positions flow can be in any direction. Can be piped as 3/2 normally closed flow into inlet, 3/2 normally open flow into exhaust, 3/2 diverting flow into outlet.

5/2 Single Acting0

5 ports 2 positions (1 inlet, 2 outlets, 2 exhaust ports). Power to coil Cylinder fully extends - Power off cylinder fully retracts (or visa versa)

5/2 Double Acting0

Power to left coil Cylinder fully extends, power to right coil cylinder fully retracts, power off cylinder stays put fully extended or retracted.

5/3 Way0

Power to left coil cylinder extends, power to right coil cylinder retracts, power off cylinder stays put even in a mid position.

Power Open/Power Close0

Valve requires power to open and power to close, no power valves stays in position.

Proportional / Modulating0

Valve opens proportionally according to signal input, either 4-20mA, 0-10v or 0-5 volt. Example 4mA valve closed, 8mA 25% open, 12mA 50% open, 18mA 75% open and 20mA fully open.

Pressure

Vacuum0

Vacuum products including valves, filters, regulators for vacuum and high vacuum systems down to -101Kpa.

0.02 Bar (20 mBar)0

0.02 Bar = 20 millibars = 0.29psi = 2 Kpa

0.1 Bar (100 mBar)0

0.1 Bar = 100 millibars = 1.47 psi = 1kPa

0.2 Bar (200 mBar)0

0.2 Bar = 200 millibars = 2.94 psi = 20kPa

0.3 Bar (300 mBar)0

0.3 Bar = 300 millibars = 4.41 psi = 30 kPa

0.4 Bar (400 mBar)0

0.4 Bar = 400 millibars = 4.41 psi = 40 kPa

0.5 Bar (500 mBar)0

0.5 Bar = 500 millibars = 7.36 psi = 50 kPa

0.6 Bar (600 mbar)0

0.6 Bar = 600 millibars = 8.83 psi = 60 kPa

0.7 Bar (700 mBar)0

0.7 Bar = 700 millibars = 10.3 psi = 70 kPa

0.8 Bar (800 mBar)0

0.8 Bar = 800 millibars = 11.77 psi = 80 kPa

1 Bar0

1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa

1.2 Bar0

1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa

1.3 Bar0

1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa

1.4 Bar0

1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa

1.5 Bar0

1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa

1.6 Bar0

1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa

2 Bar0

2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa

2.5 Bar0

2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

12 Bar0

12 Bar = 176.52 psi = 1.2 MPa

13 Bar0

13 Bar = 191.23 psi = 1.3 MPa

14 Bar0

14 Bar = 205.94 psi = 1.4 MPa

15 Bar0

15 Bar = 220.65 psi = 1.5 MPa

16 Bar0

16 Bar = 235.36 psi = 1.6 MPa

17 Bar0

17 Bar = 250.07 psi = 1.7 MPa

18 Bar0

18 Bar = 264.78 psi = 1.8 MPa

20 Bar0

20 Bar = 294.2 psi = 2 MPa

25 Bar0

25 Bar = 367.8 psi = 2.5 MPa

30 Bar0

30 Bar = 441.3 psi = 3 MPa

35 Bar0

35 Bar = 514.9 psi = 3.5 MPa

40 Bar0

40 Bar = 588.4 psi = 4 MPa

50 Bar0

50 Bar = 735.5 psi = 5 MPa

60 Bar0

60 Bar = 882.6 psi = 6 MPa

64 Bar0

64 Bar = 941.4 psi = 6.4 MPa

70 Bar0

70 Bar = 1029.7 psi = 7 MPa

80 Bar0

80 Bar = 1176.8 psi = 8 MPa

90 Bar0

90 Bar = 1323.9 psi = 9 MPa

100 Bar0

100 Bar = 1471 psi = 10 MPa

120 Bar0

120 Bar = 1765.2 psi = 12 MPa

130 Bar0

130 Bar = 1912.3 psi = 13 MPa

135 Bar0

140 Bar0

140 Bar = 2059.4 psi = 14 MPa

150 Bar0

150 Bar = 2206.5 psi = 15 MPa

160 Bar0

160 Bar = 2353.6 psi = 16 MPa

200 Bar0

200 Bar = 2942 psi = 20 MPa

225 Bar0

225 Bar = 3309.75 psi = 22.5 MPa

270 Bar0

270 Bar = 3971.7 psi = 27 MPa

300 Bar0

300 Bar = 4413 psi = 30 MPa

350 Bar0

350 Bar = 5148.5 psi = 35 MPa

400 Bar0

400 Bar = 5884 psi = 40 MPa

500 Bar0

500 Bar = 7355 psi = 50 MPa

600 Bar0

600 Bar = 8826 psi = 60 MPa

Seals

ECO0

ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C

EPDM0

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

FFKM (Kalrez)0

FF-KM Perfluoroelastomer - known as Kalrez, Chemraz or Perlast. Good most Solvents, Chemicals + excellent resistance to almost every thing, far surpassing FKM. -40°C to +250°C.

HNBR0

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

Hypalon0

Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Neoprene0

Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.

Peek0

PEEK (Polyetheretherketone) excellent chemical resistance, high temperature resistance, and low friction properties. -50°C to +250°C.

PTFE (Teflon)0

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Ruby0

Synthetic ruby or synthetic corundum or synthetic sapphire. Exceptional hardness, wear resistance, and chemical inertness chemically inert and resistant to most acids, alkalis, and solvents. -200°C to 2000°C.

Silicone0

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

Voltalef0

Voltalef known as PCTFE excellent chemical resistance, radiation resistance, and flammability characteristics, resistant to cold flow and it has the lowest coefficient of thermal expansion of any unfilled fluoropolymer. -240°C to +193.3°C.

VST0

VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C

Voltage

3vDC0

3 volts Direct Current for 2x 1.5v AA batteries

6vDC0

6 volts Direct Current

12vDC0

12 volts Direct Current

12vAC0

12 volts 50/60Hz Alternating Current

24vDC0

24 volts Direct Current

24vAC0

24 volts 50/60Hz Alternating Current

36vAC0

36 volts 50/60Hz alternating current

48vAC0

48 volts 50/60Hz alternating current

48vDC0

48 volts Direct Current

110vAC0

110 volts 50/60Hz Alternating Current

110vDC0

110 volts Direct Current

125vDC0

125 volts Direct Current

230VAC0

230 volts 50/60Hz Alternating Current

200vDC0

200 volts Direct Current

380vAC0

380 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

ATEX Zone II GD0

hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.

ATEX Exm0

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd0

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

ATEX Exia0

ATEX protection by intrinsic safety, II 2 G Ex ia IIB/IIC T4 or T6.

IP540

Dust protected and protected against splashing water

IP650

Dust tight and protected against water jets

IP660

Dust protected and protected against powerful water jets.

IP670

Dust protected and protected against immersion in water

IP680

Dust protected and protected against the effects of continuous immersion in water.

IPX0 (Faston Tag)0

No protection against foreign object or water ingress.

CSA0

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

CUTR0

CUTR approval stands for "Center for Urban Transportation Research" approval, indicating compliance with transportation standards and regulations for projects or products.

SIL30

SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.

UL0

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

WRAS0

WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.

Orifice

0.4mm0

Valve orifice or sealing face with diameter 0.4mm

0.5mm0

Valve orifice or sealing face with diameter 0.5mm

0.6mm0

Valve orifice or sealing face with diameter 0.6mm

0.7mm0

Valve orifice or sealing face with diameter 0.7mm

0.8mm0

Valve orifice or sealing face with diameter 0.8mm

0.9mm0

Valve orifice or sealing face with diameter 0.9mm

1.0mm0

Valve orifice or sealing face with diameter 1mm

1.1mm0

Valve orifice or sealing face with diameter 1.1mm

1.2mm0

Valve orifice or sealing face with diameter 1.2mm

1.3mm0

Valve orifice or sealing face with diameter 1.3mm

1.4mm0

Valve orifice or sealing face with diameter 1.4mm

1.5mm0

Valve orifice or sealing face with diameter 1.5mm

1.6mm0

Valve orifice or sealing face with diameter 1.6mm

1.8mm0

Valve orifice or sealing face with diameter 1.8mm

2.0mm0

Valve orifice or sealing face with diameter 2mm

2.2mm0

Valve orifice or sealing face with diameter 2.2mm

2.3mm0

Valve orifice or sealing face with diameter 2.3mm

2.4mm0

Valve orifice or sealing face with diameter 2.4mm

2.5mm0

Valve orifice or sealing face with diameter 2.5mm

3.0mm0

Valve orifice or sealing face with diameter 3mm

3.5mm0

Valve orifice or sealing face with diameter 3.5mm

4.0mm0

Valve orifice or sealing face with diameter 4mm

4.5mm0

Valve orifice or sealing face with diameter 4.5mm

5.0mm0

Valve orifice or sealing face with diameter 5

5.5mm0

Valve orifice or sealing face with diameter 5.5mm

6.0mm0

Valve orifice or sealing face with diameter 6mm

6.5mm0

Valve orifice or sealing face with diameter 6.5mm

7mm0

Valve orifice or sealing face with diameter 7mm

7.5mm0

Valve orifice or sealing face with diameter 7.5

8.0mm0

Valve orifice or sealing face with diameter 8mm

9.0mm0

Valve orifice or sealing face with diameter 9mm

9.5mm0

Valve orifice or sealing face with diameter 9.5mm

10mm0

Valve orifice or sealing face with diameter 10mm

11mm0

Valve orifice or sealing face with diameter 11mm

12mm0

Valve orifice or sealing face with diameter 12mm

13mm0

Valve orifice or sealing face with diameter 13mm

14mm0

Valve orifice or sealing face with diameter 14mm

15mm0

Valve orifice or sealing face with diameter 15mm

17mm0

Valve orifice or sealing face with diameter 17mm

18mm0

Valve orifice or sealing face with diameter 18mm

20mm0

Valve orifice or sealing face with diameter 20mm

22mm0

Valve orifice or sealing face with diameter 22mm

23mm0

Valve orifice or sealing face with diameter 23mm

24mm0

Valve orifice or sealing face with diameter 24mm

25mm0

Valve orifice or sealing face with diameter 25mm

28mm0

Valve orifice or sealing face with diameter 28mm

30mm0

Valve orifice or sealing face with diameter 30mm

32mm0

Valve orifice or sealing face with diameter 32mm

35mm0

Valve orifice or sealing face with diameter 35mm

38mm0

Valve orifice or sealing face with diameter 38mm

40mm0

Valve orifice or sealing face with diameter 40mm

45mm0

Valve orifice or sealing face with diameter 45mm

50mm0

Valve orifice or sealing face with diameter 50mm

59mm0

65mm0

Valve orifice or sealing face with diameter 65mm

80mm0

Valve orifice or sealing face with diameter 80mm

Operation

Assisted Lift0

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting0

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted0

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Anti Water Hammer0

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Banjo0

allows fluid to flow through the central hole in the banjo bolt and exit through the radial holes, facilitating connections in tight spaces or where angular adjustments are needed

Bi-Directional Flow0

Can control flow in both directions

Degreased0

Oil and grease removed typically for oxygen or paint spray use.

Flow Control0

Flow regulation to control the amount of flow.

Manifold0

A group of multiple valves together on one manifold, simple layout streamline control and space saving.

Manual Override0

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Manual Reset0

A facility that prevents a valve from returning to its previous position without manual intervention by a lever or button. Typically used for safety systems.

Mounting Bracket0

Valve has the facility to be supplied with a bracket for mounting and securing.

Mounting Holes0

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Outlet - right angle0

The outlet port is at right angles to inlet port, ideal for space efficiency.

Outlet - Hose tail0

Outlet port and a Hose tail or barb to connect directly into flexible tube

Position Feedback Closed0

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed0

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position proximity switch - Open0

The valve is equipped with an additional volt free electrical switch that is triggered as the valve reaches the open position.

Position indication Visual 0

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Shading Ring - Silver0

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without0

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Y Pattern0

A Y-pattern valve is a valve with a Y-shaped body design, typically used for high-pressure applications to reduce pressure drop and turbulence, often found in steam systems.

Spares (Coils, Connectors, Seals)

Manifold0

Nuts + bolts + plates0

Only Show Items In Stock

Hide spare parts

Showing 1 - 20 of 406 total products

1/2 Plastic water solenoid valve 0.2-10 Bar Latching 5115BB £40.72 £34.03 inc VAT

152 IN STOCK

1/2 Brass solenoid valve 0.5-15 Bar 2/2 way Normally Closed £88.96 £53.38 inc VAT

1524 IN STOCK

3/4 Plastic water solenoid valve 0.2-10Bar Latching (6115BB) £37.00 £30.74 inc VAT

121 IN STOCK

1/4 Brass solenoid valve 0-8.5 Bar 2/2 way Normally Closed £41.50 £30.43 inc VAT

1009 IN STOCK

1/4 Air solenoid valve 1.5-10 Bar 5/2 way single 22mm wide £40.40 £26.40 inc VAT

129 IN STOCK

Namur air solenoid valve 1.5-10 Bar 3/2 5/2 single acting £70.50 £35.26 inc VAT

177 IN STOCK

1 Stainless ball valve motor actuated Open/Close + Failsafe £138.35 £103.76 inc VAT

73 IN STOCK

1/8 1/4 Air solenoid valve 1.5-10Bar 3/2 single 18+22mm wide £38.90 £25.69 inc VAT

67 IN STOCK

3/8 Brass solenoid valve 0.1-16 Bar 2/2 way Normally Closed £52.82 £42.82 inc VAT

113 IN STOCK

1/8 Brass solenoid valve 0-8.5 Bar 2/2 way Normally Closed £41.50 £30.43 inc VAT

1091 IN STOCK

1/4 Brass solenoid valve 0-150 Bar 2/2 way Normally Closed £67.48 £49.49 inc VAT

615 IN STOCK

1/8 Air solenoid valve 1.5-10 Bar 5/2 way single 18mm wide £44.74 £32.81 inc VAT

24 IN STOCK

1/2 Brass solenoid valve 0-8.5 Bar 2/2 way Normally Closed £89.23 £72.34 inc VAT

813 IN STOCK

15mm Plastic water solenoid valve 0.2-10 Bar Latching 1175BB £48.82 £38.24 inc VAT

961 IN STOCK

1 Brass solenoid valve 0.5-15 Bar 2/2 way Normally Closed £159.36 £95.62 inc VAT

426 IN STOCK

1/2 Brass solenoid valve 0.5-15 Bar 2/2 way Normally Open £126.46 £79.20 inc VAT

1521 IN STOCK

3/4 Brass solenoid valve 0.5-15 Bar 2/2 way Normally Closed £133.08 £79.85 inc VAT

730 IN STOCK

1/8 Brass solenoid valve 0-10 Bar 2/2 way Normally Closed £51.59 £38.03 inc VAT

200 IN STOCK

1/8, 1/4 Solenoid valve 0-8 Bar 3/2 N/Closed (Manifoldable) £44.52 £35.90 inc VAT

704 IN STOCK

1/4, 3/8, 1/2 Air solenoid valve 2-10 Bar 3/2 single acting £46.84 £30.91 inc VAT

95 IN STOCK

1
2
3
4
...
20
Last

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
sales@solenoid-valves.com

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

ATEX Valves Search by Brand Breathing Air Filters High Pressure Valves Clearance Items WRAS Valves New Products Information Chemical Compatibility Guide

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2025 Connexion Developments Ltd, All rights reserved.