Key Features
- Pre-Wired DIN Form A Connector
- 3 Metre Cable Included
- 3 Core 0.75mm² Cable
- 0–250V AC/DC
- 10A Maximum Current
- No Internal Circuit
- DIN 43650A / EN 175301-803
- Standard 18mm Pin Spacing
- Moulded Connector Design
- IP65 Protection
- NBR Gasket Included
- M3 Fixing Screw Included
Description
Pre-Wired DIN 43650 Form A Connector 3 Metre Cable – IP65
Moulded DIN 43650 Form A pre-wired electrical connector supplied complete with a 3 metre, 3-core 0.75mm² cable for fast and reliable connection to compatible solenoid valves and coils.
Designed around the standard 18mm DIN Form A pin arrangement, the connector eliminates the need to assemble and terminate a conventional DIN plug on site. The moulded cable connection provides a neat, ready-to-install solution particularly suited to OEM machinery, industrial automation and replacement solenoid valve wiring.
With no internal electronic circuit, the connector is suitable for AC or DC applications up to 250V and 10A maximum, subject to the electrical rating of the connected equipment.
Supplied complete with NBR gasket and M3 locating/fixing screw for installation onto compatible DIN Form A solenoid coils.
Electrical Specification
Connector type: DIN Form A
Standard: DIN 43650A / EN 175301-803
Pin spacing: 18mm
Poles: 2 + PE
Maximum voltage: 250V AC/DC
Maximum current: 10A
Circuit: None
Contact material: CuZn, zinc plated
Terminal block material: PA6 GF30
Protection: IP65
Pre-Wired 3 Metre Cable
Cable length: 3 metres
Cable type: H05WF PVC
Cable cores: 3
Conductor size: 0.75mm²
Cable colour: Black
Core colours:
✓ Brown
✓ Blue
✓ Green / Yellow
Cable stripping: 30mm
The factory pre-wired design reduces installation time and removes the need to terminate individual conductors inside a conventional field-wireable DIN connector.
No Internal Circuit
This version contains no LED, rectifier, VDR, TVS or other internal electronic circuit.
It provides a straightforward electrical connection between the supply cable and compatible DIN Form A solenoid coil.
This makes it particularly suitable where indication or electrical suppression is either unnecessary or already incorporated elsewhere in the control system.
DIN 43650 Form A Connection
The connector uses the standard DIN 43650A Form A 18mm pin arrangement commonly found on industrial solenoid valves and coils.
Contact distance: 18mm
Ground position: 6/12h
Supplied with:
✓ NBR sealing gasket
✓ M3 locating/fixing screw
IP65 Moulded Construction
Protection rating: IP65
The moulded connector and cable assembly provides a neat alternative to a conventional field-wired DIN plug, eliminating the separate cable gland and reducing the number of components requiring assembly during installation.
When correctly fitted to a compatible solenoid coil with the supplied gasket, the connector provides IP65 environmental protection.
0–250V AC/DC
Because the connector contains no voltage-specific LED or suppression electronics, it can be used across a wide range of compatible AC and DC solenoid coil voltages up to its 250V maximum rating.
This makes one connector suitable for numerous common industrial control voltages.
The supply voltage must always correspond with the rated voltage of the connected solenoid coil.
Why Choose a Pre-Wired DIN Connector?
A pre-wired moulded connector can significantly simplify installation compared with a conventional field-assembled DIN plug.
There is no requirement to:
✓ Fit a separate cable gland
✓ Strip cable at the connector end
✓ Terminate individual connector terminals
✓ Assemble the connector housing
✓ Fit individual internal sealing components
The result is a quick, tidy and repeatable solenoid valve electrical connection, particularly useful when installing multiple valves or manufacturing OEM equipment.
Typical Applications
✓ Solenoid valves
✓ Pneumatic valves
✓ Hydraulic valves
✓ Water control valves
✓ Process control equipment
✓ Industrial automation
✓ OEM machinery
✓ Packaging machinery
✓ Pump systems
✓ Factory automation
✓ Replacement valve wiring
✓ Pre-assembled machinery harnesses
Why Choose This DIN Form A Connector?
This pre-wired DIN connector combines the industry-standard DIN 43650 Form A 18mm connection with a factory-fitted 3 metre cable.
With 250V maximum voltage, 10A maximum current and IP65 protection, it provides a simple general-purpose connection for compatible industrial solenoid valves without additional electronic circuitry.
The moulded construction is particularly useful where installation speed, consistent wiring and a neat finished connection are preferred over assembling conventional DIN connectors on site.
Related Products & Categories
Technical Specification
Brand: Connexion
Model: DIN2-3MTR
Width: 28.00 mm
Height: 31.00 mm
Depth: 28.00 mm
Weight: 0.40 kg
Voltage: 3vDC, 6vDC, 12vDC, 12vAC, 24vDC, 24vAC, 36vAC, 48vAC, 48vDC, 110vAC, 110vDC, 125vDC, 230VAC, 200vDC
Spares (Coils, Connectors, Seals): DIN connector Form A
Approvals:: IP65
Found in these Categories
Electrical Connector Form A prewired 3 mtr cable 0-250v IP65
£6.29 incl. VAT £5.24 ex. VAT
-30% Was £8.98 incl. VAT