Key Features

  • Normally Open Fail-Open Valve
  • 2/2 Way Normally Open
  • Direct Acting Valve Design
  • Zero Pressure Differential
  • Energise to Close Operation
  • Opens Automatically Power-Off
  • 1/8" & 1/4" Connections
  • Optional NPT Threads
  • Operating Pressure Up to 10 Bar
  • 1.6mm & 2.4mm Orifice Options
  • Up to 3.0 L/min Water Flow
  • AISI 303 Stainless Steel Body
  • Stainless Steel Internals
  • FKM Viton Seals as Standard
  • Optional NBR & EPDM Seals
  • Air, Water, Vacuum & Light Oils
  • Media Viscosity Up to 40 cSt
  • Fast 6–20ms Switching
  • 31400 High Power Solenoid Coil
  • 100% Continuous Duty Rated
  • DIN 43650A Electrical Connection
  • IP65 Protection With Connector

Datasheets

Description

1/8"–1/4" Normally Open Stainless Solenoid Valve – JAX


The JAX Series is a compact 2/2 way normally open stainless steel solenoid valve designed for air, water, vacuum, light oils, gases and compatible process fluids. Its direct-acting design operates from zero pressure differential, making it suitable for low-pressure and vacuum systems as well as conventional pressurised applications.

Available with 1/8" or 1/4" connections, the JAX provides a choice of 1.6mm or 2.4mm orifices with operating pressures up to 10 Bar AC or 7 Bar DC, depending on orifice size. When electrical power is removed, the valve automatically returns to its normally open position, providing a useful fail-open / power-to-close function.

The valve features an AISI 303 stainless steel body, stainless steel internals and FKM (Viton) seals as standard, with NBR and EPDM seal options for alternative media and temperature requirements. The manufacturer's specification confirms direct operation, zero minimum pressure and the individual AC/DC pressure ratings.

Valve Function & Operation

Function: 2/2 way normally open
Operation: Direct acting
Fail position: Open
Minimum differential pressure: 0 Bar
The JAX is open when the solenoid is de-energised. Applying electrical power energises the solenoid operator and closes the valve.
If electrical power is removed, the valve automatically returns to its open position, making it suitable for applications requiring fail-open operation.
Because the JAX is direct acting, it does not rely on inlet pressure or differential pressure to operate.

Ports & Connections

Port sizes:
JAX 1/8" → 1/8" connection
JAX 1/4" → 1/4" connection
Optional thread: NPT
The supplied manufacturer's sheet lists BSPT as the standard port and NPT as an option.

Pressure & Performance

1.6mm Orifice
AC pressure: 0–10 Bar
DC pressure: 0–7 Bar
Water flow: 1.43 L/min
2.4mm Orifice
AC pressure: 0–7 Bar
DC pressure: 0–5 Bar
Water flow: 3.0 L/min
Both orifice sizes are available with either 1/8" or 1/4" ports.
Opening / closing time: 6–20 milliseconds maximum
Maximum media viscosity: 40 cSt
Mounting position: Any position
The manufacturer specifies a maximum overall pressure of 10 Bar and confirms the fast switching time and unrestricted mounting orientation.

Construction & Materials

Body: AISI 303 stainless steel
Tube and internals: Stainless steel
Head and plunger: 430FR stainless steel
Standard seals: FKM / Viton
Optional seals:
✓ NBR
✓ EPDM
The stainless construction makes the JAX suitable for a wider range of compatible fluids and gases than a conventional brass normally open valve.

Seal & Temperature Options

The manufacturer's table gives the following maximum media temperatures:
NBR → +50°C
FKM / Viton → +80°C
EPDM → +120°C
Ambient temperature: -10°C to +50°C
This is worth changing from a blanket “120°C max” claim: +120°C applies specifically to the EPDM configuration, rather than the standard FKM valve.

Media Compatibility

Suitable for:
✓ Compressed air
✓ Water
✓ Vacuum
✓ Light oils
✓ Compatible gases
✓ Compatible process fluids
Maximum viscosity: 40 cSt
For other fluids, compatibility should be confirmed against the AISI 303 stainless steel body, stainless internals and selected FKM, NBR or EPDM seal material.

Coil & Electrical

Solenoid coil: 31400
Insulation: Class F 155°C
Duty cycle: 100% continuous duty
Protection: IP65 with connector
Connection: DIN 43650A
DC power: 14–20 Watts
AC power: 48VA inrush / 26VA holding
The electrical data on the supplied JAX sheet confirms the 31400 coil, Class F insulation, IP65 protection and continuous-duty operation.

Voltage Options

DC:
✓ 12V DC
✓ 24V DC
AC 50/60Hz:
✓ 24V AC
✓ 48V AC
✓ 110V AC
✓ 230V AC
✓ 415V AC
I'd therefore remove 48VDC and 110VDC from this particular page unless those are special configurations you know you can supply outside the datasheet.

Typical Applications

Fail-open fluid control
Cooling water systems
Vacuum equipment
Compressed air systems
Water treatment equipment
Light oil control
Compatible gas systems
Instrumentation
Process equipment
OEM machinery
Industrial automation
Systems requiring automatic opening on power loss

Why Choose the JAX Series?

The JAX combines normally open operation with direct-acting zero-pressure performance, making it particularly useful where a valve must automatically open when electrical power is removed.
Unlike pressure-assisted normally open valves, the JAX can operate correctly at 0 Bar differential pressure and can therefore be used for vacuum, low-pressure and closed-loop applications.
Its compact stainless steel construction, fast switching and pressure capability up to 10 Bar make it a useful alternative where a brass normally open solenoid valve is unsuitable.

Ordering Information

Select:
✓ 1/8" or 1/4" port
✓ 1.6mm or 2.4mm orifice
✓ FKM, NBR or EPDM seals
✓ Required AC or DC voltage
✓ Standard or optional NPT thread 

Related Products & Categories


Normally Open Solenoid Valves

1/4" Stainless Steel Solenoid Valves
View Technical Specification

Technical Specification

Brand: Shako Co Ltd

Model: JAX

Width: 30.00 mm

Height: 76.00 mm

Depth: 30.00 mm

Weight: 0.28 kg

Valve / Product Type: Solenoid Valve

Body Material: Stainless Steel

Voltage: 110vAC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC

Port Size: 1/4 thread, 1/8 thread

Function: 2/2 Failsafe Open

Operation: Direct Acting from 0 Pressure

Pressure: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar

Seals: EPDM, NBR, FKM (Viton)

Approvals:: IP65

Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Water

Options required: Mounting Holes

Orifice: 1.6mm, 2.4mm

1/8 & 1/4" Stainless Solenoid Valve 0-10 Bar Normally Open

£88.15 incl. VAT £73.46 ex. VAT

-19% Was £108.73 incl. VAT

Brand: Shako Co Ltd

Model: JAX

Stock: 62 in stock

Read Full Description
We use a few optional cookies to see how our adverts and site perform. Details