1 BSP pressure reducing valve 12-200 Bar proportional 0-10v Type 785-E
£1,126.39
£2,183.15 incl. VATDescription
Electronic 0 to 10 volt pressure regulating valve type 785-E
0 to 10 volt stepless pressure regulation.
Connection: G1 (BSP)
Pressure range: 12 to 160 Bar, 10 to 120 Bar, 5 to 64 Bar, 3 to 40 Bar, 10 to 200 Bar, 5 to 140 Bar or 3 to 80 Bar according to orifice and actuator.
Media: Liquid / fluid (50 micron)
Orifice: 10mm, 12mm, 15mm or 20mm
Kv flow factor: 3, 6, 8.3 or 14.1 m3/hr according to orifice
Body: AISI303 stainless
Seal: FKM
Temperature media: 0 to +60°C
Temperature ambient: 0 to +50°C
Electrical connection: M12x1
Nominal voltage: 24vDC (Max residual ripple 10%)
Voltage tolerance: +/- 10% according to VDE 0580
Power consumption: 2.5 Watts
Protection: IP65 with connector (Included)
Mounting: M12 connector preferred upright
Control air 8 Bar filtered to 40 micron or better
Piping: Following flow-calming sections in terms of straight conduit are best.
Before the valve (P) a length of three times the internal diameter.
After the valve (T) must be free discharge of media. No dynamic pressure and minimal flow resistance must be ensured at all times.
Technical Specification
Brand: RSG
Model: 785-E
Width: 70.00 mm
Height: 143.00 mm
Depth: 160.00 mm
Weight: 2.00 kg
Valve / Product Type: Pressure Reducing
Body Material: Stainless Steel
Voltage: 24vDC
Port Size: 1 Inch
Function: Proportional / Modulating
Operation: Pressure Assisted
Pressure Maximum: 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar, 120 Bar, 130 Bar, 135 Bar, 140 Bar, 150 Bar, 160 Bar, 200 Bar
Seals: FKM (Viton)
Approvals: IP65
Media: Fluid >50cSt (Non Aggressive), Oils + Fuels >50cSt Max
Orifice: 10mm, 12mm, 15mm, 20mm