Key Features
- Genuine Elektrogas Coils
- For VMR Gas Safety Valves
- Automatic Reset VMR Series
- Normally Closed Gas Valves
- Sizes 1/4" to 6"
- DN8 to DN150 Coverage
- 12V Versions Available
- 24V Versions Available
- 110V Versions Available
- 230V Versions Available
- AC & DC Options
- ATEX Options Available
- EN161 Valve Applications
- Natural Gas Applications
- Exact VMR Model Selection
- Replacement Coil Assemblies
Datasheets
Description
Elektrogas VMR Automatic Reset Gas Valve Solenoid Coils
Genuine Elektrogas replacement solenoid coils and electromagnetic heads for VMR Series automatic reset normally closed gas safety shut-off valves.
Covering VMR gas valves from 1/4" through 6" (DN8–DN150), these replacement coils are available in different sizes, power ratings and voltages according to the VMR valve model.
The Elektrogas VMR Series is designed for automatic gas safety shut-off applications. It is therefore essential that the replacement coil is selected according to the exact VMR valve model, valve size and supply voltage.
Standard 230V versions are normally stocked, with selected 12V, 24V, 110V and other versions available.
VMR010 – 1/4" Gas Valve
For Elektrogas VMR010 1/4" gas solenoid valve.
Coil dimensions: 13/9.5mm ID × 39mm high × 29.5mm wide
Power: 8VA
Available coils:
✓ VMR1930.2070 – 230V AC
✓ VMR1930.2075 – 110V AC
✓ VMR1930.2085 – 24V DC
✓ VMR1930.2090 – 12V DC
VMR020 & VMR120 – 3/8" & 1/2" Brass
For Elektrogas VMR020 3/8" and VMR120 1/2" brass gas solenoid valves.
Coil dimensions: 13mm ID × 38.5mm high × 36mm wide
Power: 18VA
Available coils:
✓ VMR1930.2101 – 230V AC
✓ VMR1930.2301 – 110V AC
✓ VMR1930.2151 – 24V DC
✓ VMR1930.2171 – 12V DC
VMR12 – 1/2" Aluminium
For Elektrogas VMR12 1/2" aluminium gas solenoid valve.
Power: 25VA
✓ VMR1930.2110 – 230V AC/DC
VMR22 & VMR32 – 3/4" & 1"
For Elektrogas VMR22 3/4" and VMR32 1" gas solenoid valves.
Power: 25VA
✓ VMR1930.1311 – 230V AC/DC
VMR352, VMR42 & VMR62 – 1¼" to 2"
For:
✓ VMR352 – 1¼"
✓ VMR42 – 1½"
✓ VMR62 – 2"
Power: 30VA / 120W
Available coils:
✓ VMR1930.1416 – 230V AC/DC
✓ VMR1930.1436 – 110V AC/DC
✓ VMR1930.1452 – 24V AC/DC
VMR72 & VMR82 – DN65 & DN80
For:
✓ VMR72 – 2½" / DN65
✓ VMR82 – 3" / DN80
Power: 45VA / 180W
Available coils:
✓ VMR1930.1812 – 230V AC/DC
✓ VMR1930.1832 – 110V AC/DC
✓ VMR1930.1852 – 24V AC/DC
VMR92 – 4" DN100
For Elektrogas VMR92 4" / DN100 gas safety shut-off valve.
Power: 70VA / 280W
✓ VMR1930.1912 – 230V AC/DC
Important VMR92 Voltage Warning
The VMR92 uses a mechanism matched to the valve's electrical configuration.
Do not change a VMR92 between 24V and 110/230V simply by replacing the coil.
The correct replacement coil must be selected according to the existing valve voltage and mechanism. A 230/240V to 110V change is stated as acceptable, but other voltage conversions should be checked with our technical team before ordering.
VMR932 & VMR952 – DN125 & DN150
For:
✓ VMR932 – 5" / DN125
✓ VMR952 – 6" / DN150
Power: 80VA / 320W
✓ VMR1930.1990 – 230V AC/DC
Other Voltages & Versions
230V versions are typically stocked.
Depending upon the VMR valve model, other versions may include:
✓ 12V
✓ 24V
✓ 110V
✓ ATEX versions
✓ 360mbar versions
✓ 500mbar versions
✓ Higher-pressure versions up to 6 Bar
Please contact our technical team with the complete Elektrogas VMR valve model and voltage if the required replacement is not shown.
Important Replacement Information
VMR replacement coils are not universally interchangeable between valve sizes or voltages.
Before ordering, check:
✓ Complete VMR valve model
✓ Valve size / DN
✓ Existing supply voltage
✓ Coil part number where visible
✓ Valve pressure rating
✓ Standard or ATEX requirement
This is particularly important for the VMR92 DN100, where changing the coil voltage can require a different valve mechanism.
Typical Applications
✓ Natural gas safety systems
✓ Gas burner installations
✓ Industrial gas trains
✓ Commercial boiler systems
✓ Burner management systems
✓ Heating plant
✓ Gas-fired process equipment
✓ OEM gas control systems
Related Products & Categories
Elektrogas Safety Shut Off Valves
Replacement Solenoid Coils
Technical Specification
Brand: Elektrogas
Model: VMR1930
Width: 46.00 mm
Height: 164.00 mm
Depth: 96.00 mm
Weight: 1.50 kg
Body Material: Aluminium, Brass
Approvals:: EN161, IP54, IP65
Media: Natural Gas
Spares (Coils, Connectors, Seals): Coil bore 13mm, Coil bore 20mm+
Voltage: 12vDC, 24vDC, 24vAC, 110vAC, 230VAC
Found in these Categories
Elektrogas VMR Gas Valve Replacement Solenoid Coils
£45.56 incl. VAT £37.97 ex. VAT
-40% Was £75.60 incl. VAT