Description
DIN Form C Analogue 8mm Connector 2m Cable IP67
The Nass Magnet 615-202-0040 is a moulded, pre-wired DIN Form C Analogue electrical connector manufactured to EN 175301-803 / ISO 15217 with 8mm contact spacing.
Supplied with a 2 metre, 3-core PVC cable, the connector provides a ready-wired IP67 electrical connection for compatible miniature solenoid valves and electromagnetic devices.
With no internal LED, rectifier or suppression circuit, it is suitable for AC or DC supplies from 0–250V, subject to the connected solenoid coil being correctly rated for the applied voltage.
Electrical Specification
Connector: Form C Analogue
Standard: EN 175301-803 / ISO 15217
Contact spacing: 8mm
Poles: 2 + 2PE
Earth position: 6h / 12h
Voltage range: 0–250V AC/DC
Maximum operating current: 6A
Circuit: None
LED: None
Protection element: None
Contacts: CuZn, Cu/Sn coated
Contact resistance: <15mΩ
Pre-Wired 2 Metre Cable
Cable: Black PVC
Length: 2 metres
Conductors: 3 × 0.50mm²
Core colours: Brown, blue, green/yellow
Outside diameter: Approx. 5.1mm
Stripped length: 30mm
Wire ends: Fitted with ferrules
Fixed cable temperature: −30°C to +80°C
Flexible cable temperature: −5°C to +70°C
No Internal Circuit
This version provides a straightforward electrical connection without voltage-specific electronics.
There is no LED, VDR/varistor, TVS, diode or bridge rectifier.
This allows the connector itself to operate over 0–250V AC/DC, although the voltage of the connected solenoid coil must always match the supply voltage.
Moulded IP67 Construction
Moulded jacket: Anthracite grey translucent TPU
Terminal block: PA6 GF15
Gasket: Moulded TPU
Fixing screw: M2.5 × 22.5mm
Screw material: A2-50 stainless steel
Tightening torque: 0.4 ± 0.1Nm
Protection: IP67 when correctly fitted to the mating component.
Typical Applications
✓ Miniature solenoid valves
✓ Pneumatic control valves
✓ Compact directional valves
✓ Process control equipment
✓ Industrial automation
✓ OEM machinery
✓ Instrumentation systems
✓ AC and DC solenoid coils
Why Choose the Nass Form C Analogue Connector?
The 615-202-0040 combines the compact 8mm Form C Analogue interface with a factory-moulded 2 metre cable and IP67 protection.
Its no-circuit design provides broad AC/DC voltage compatibility, while the moulded cable eliminates on-site connector wiring and provides a secure connection for industrial installations.
Related Products & Categories
