Solenoid valve world

General Valves WRAS Natural Gas Wizard Ball Valves Pneumatics Contact Us

Home
Pneumatics
Air line fittings + tube

Air Line Fittings + Tube

Push in rapid airline fittings and flexible pneumatic tubing, 9 Bar, -10°C to +70°C Rated, Sizes 4 to 12mm / M5 to 1/2 inch.

Show Sub Categories

When precision, reliability, and performance are essential in your pneumatic systems, Advanced Pneumatic Super Rapid Push to Connect Fittings deliver advanced engineering in a compact, high-performance design.

Advanced Push-to-Connect Fittings

Male and female BSP and metric Stud and union pneumatic push to connect fittings

Push fittings - Studs + Unions

Male and female BSP and metric pneumatic push to connect elbow fittings

Push fittings - Elbows

Male BSP and metric pneumatic push to connect T and Y type airline fittings

Push fittings - T's + Y's

Push fittings - Multi Port

Push fittings Plugs / Caps + Reducers

Push fittings - flow + speed control

316 Stainless steel pneumatic push in fittings 4-12mm M5 to 1/2 BSP thread, compressed air to 10 Bar to +180°C available online at solenoid valve world

Push fittings - Stainless steel

Filters

Price

Valve / Product Type

AirLine Fittings + Tube0

compressed air line tubing and push to connect fittings

Air release vacuum breaker0

valves that release trapped air and vacuum

Check Valve0

Check + non return valves only allow flow in one direction

Flow rate control0

Flow regulating valves with manual or electric modulating 4-20mA control.

Manual Control0

Air valves that are controlled manually

Manual Twist0

3/2 and 5/2 air control valves that require users to twist a button

Mechanical0

2/2, 3/2, 5/2 mechanical air control valves for automated pneumatic systems.

Safety Shut Off0

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Port Size

4mm0

M50

1/8 thread0

valves with 1/8 inch threaded ports

1/4 thread0

valves with 1/4 inch threaded ports

6mm0

8mm0

3/8 thread0

valves with 3/8 inch threaded ports

10mm0

12mm0

1/2 thread0

valves with 1/2 inch threaded ports

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Fluid Thick 51>500cSt0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Oils + Fuels 50cSt Max0

Steam0

Vacuum (Low)0

Vacuum (Medium)0

Vacuum (High)0

Water0

Water (RO/Pure/Demin)0

Body Material

Brass0

Delrin (POM)0

Nylon0

Polyurethane0

Stainless Steel0

Pressure

Vacuum0

Vacuum products including valves, filters, regulators for vacuum and high vacuum systems down to -101Kpa.

0.02 Bar (20 mBar)0

0.02 Bar = 20 millibars = 0.29psi = 2 Kpa

0.1 Bar (100 mBar)0

0.1 Bar = 100 millibars = 1.47 psi = 1kPa

0.2 Bar (200 mBar)0

0.2 Bar = 200 millibars = 2.94 psi = 20kPa

0.3 Bar (300 mBar)0

0.3 Bar = 300 millibars = 4.41 psi = 30 kPa

0.4 Bar (400 mBar)0

0.4 Bar = 400 millibars = 4.41 psi = 40 kPa

0.5 Bar (500 mBar)0

0.5 Bar = 500 millibars = 7.36 psi = 50 kPa

0.6 Bar (600 mbar)0

0.6 Bar = 600 millibars = 8.83 psi = 60 kPa

0.7 Bar (700 mBar)0

0.7 Bar = 700 millibars = 10.3 psi = 70 kPa

0.8 Bar (800 mBar)0

0.8 Bar = 800 millibars = 11.77 psi = 80 kPa

1 Bar0

1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa

1.2 Bar0

1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa

1.3 Bar0

1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa

1.4 Bar0

1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa

1.5 Bar0

1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa

1.6 Bar0

1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa

2 Bar0

2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa

2.5 Bar0

2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

Seals

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Orifice

2.0mm0

Valve orifice or sealing face with diameter 2mm

2.5mm0

Valve orifice or sealing face with diameter 2.5mm

4.0mm0

Valve orifice or sealing face with diameter 4mm

5.0mm0

Valve orifice or sealing face with diameter 5

6.0mm0

Valve orifice or sealing face with diameter 6mm

6.5mm0

Valve orifice or sealing face with diameter 6.5mm

8.0mm0

Valve orifice or sealing face with diameter 8mm

10mm0

Valve orifice or sealing face with diameter 10mm

12mm0

Valve orifice or sealing face with diameter 12mm

13mm0

Valve orifice or sealing face with diameter 13mm

Options required

Banjo0

allows fluid to flow through the central hole in the banjo bolt and exit through the radial holes, facilitating connections in tight spaces or where angular adjustments are needed

Bi-Directional Flow0

Can control flow in both directions

Flow Control0

Flow regulation to control the amount of flow.

Manifold0

A group of multiple valves together on one manifold, simple layout streamline control and space saving.

Manual Control0

Valves that require manual input to operate such as lever, button or switch

Mounting Holes0

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Outlet - right angle0

The outlet port is at right angles to inlet port, ideal for space efficiency.

Outlet - Triple0

Valve has single inlet but triple or three outlet ports.

Speed controller0

A unidirectional speed controller regulates fluid or gas flow in one direction only, often used in pneumatic systems for precise control.

Y Pattern0

A Y-pattern valve is a valve with a Y-shaped body design, typically used for high-pressure applications to reduce pressure drop and turbulence, often found in steam systems.

Spares (Coils, Connectors, Seals)

Blanking Plug0

Fittings0

Manifold0

Mounting Bracket0

Nuts + bolts + plates0

Only Show Items In Stock

Hide spare parts

Showing 1 - 20 of 61 total products

*On Sale* M5-1/2 BSP Male stud pushin tube fitting 4-12mm £1.30 £0.61 inc VAT

2034 IN STOCK

End cap push-in airline fitting 4mm, 6mm, 8mm, 10mm + 12mm £1.78 £0.49 inc VAT

1720 IN STOCK

*On Sale* M5-1/2 BSP Male stud elbow pushin fitting 4-12mm £2.11 £0.61 inc VAT

914 IN STOCK

Polyurethane tubing 50-200mtr rolls All sizes + colours £37.71 £18.85 inc VAT

157 IN STOCK

1/8, 1/4, BSP Male Hex blanking plugs nickle plated brass £0.43 inc VAT

185 IN STOCK

M5-1/2 BSPT Male stud elbow push-in airline fitting 4mm-12mm £1.22 £0.61 inc VAT

1120 IN STOCK

Airline finger shut off 3/2 vent valve 4-12mm push speed fit £12.20 £3.36 inc VAT

224 IN STOCK

*On Sale* M5-1/2BSP Male Elbow swivel pushin fitting 4-12mm £3.18 £2.05 inc VAT

570 IN STOCK

*On Sale* Union straight pushin airline fitting 4mm to 12mm £2.71 £0.43 inc VAT

744 IN STOCK

*On Sale*M5-1/2BSP Male swivel elbow speed controller 4-12mm £8.72 £2.05 inc VAT

234 IN STOCK

Triple branch union airline fitting 4mm, 6mm, 8mm + 10mm £5.52 £1.51 inc VAT

296 IN STOCK

*On Sale* Equal elbow push-in airline speed fitting 4-12mm £2.71 £0.43 inc VAT

126 IN STOCK

Male end stop blanking plug push-in airline fitting 4-12mm £0.98 £0.28 inc VAT

3222 IN STOCK

Equal + unequal Tee push-in airline speed fitting 4 to 12mm £1.30 £0.65 inc VAT

1127 IN STOCK

*On Sale* M5-1/2 BSP Extended male elbow fitting 4-12mm £2.99 £1.04 inc VAT

109 IN STOCK

*On Sale* Y swivel push-in pneumatic fitting 4mm to 12mm £4.98 £2.49 inc VAT

211 IN STOCK

*On Sale* Equal Y Union fixed push-in air fitting 4 to 12mm £3.06 £0.65 inc VAT

126 IN STOCK

M5-1/2 BSPP Male Brass blanking plugs O ring seal 0-10 Bar £0.78 £0.78 inc VAT

116 IN STOCK

Double Y push in airline fitting Single Inlet 4 outlet 4-8mm £6.70 £1.84 inc VAT

187 IN STOCK

*On Sale* Bulkhead union push in airline fitting 4mm to 12mm £6.19 £1.58 inc VAT

87 IN STOCK

1
2
3
4

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
sales@solenoid-valves.com

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

ATEX Valves Search by Brand Breathing Air Filters High Pressure Valves Clearance Items WRAS Valves New Products Information

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2025 Connexion Developments Ltd, All rights reserved.