Port Size

1/8 thread

valves with 1/8 inch threaded ports

1/4 thread

valves with 1/4 inch threaded ports

3/8 thread

valves with 3/8 inch threaded ports

3/8 Flange DN10

1/2 thread

valves with 1/2 inch threaded ports

1/2 inch Flange DN15

3/4 thread

valves with 3/4 inch threaded ports

3/4 Flange DN20

1 thread

valves with 1 inch threaded ports

1 inch Flange DN25

11/4 thread

valves with 11/4 inch threaded ports

11/4 inch Flange DN32

11/2 thread

valves with 11/2 inch threaded ports

11/2 inch Flange DN40

2 thread

valves with 2 inch threaded ports

2 inch Flange DN50

21/2 inch Flange DN65

3 inch Flange DN80

4 inch Flange DN100

5 inch Flange DN125

6 inch Flange DN150

8 inch Flange DN200

10 inch Flange DN250

12 inch Flange DN300

14 inch Flange DN350

16 inch Flange DN400

18 inch Flange DN450

20 inch Flange DN500

Media

Function

2/2 Failsafe Closed

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Failsafe Open

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Latching

2 ports (inlet/outlet) with 2 positions (Open/Closed) - short power pulse valve stays open - reverse power pulse valve stays closed

Pressure

Seals

Voltage

Approval: ATEX,WRAS,IP etc

ATEX Exm

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

IP54

Dust protected and protected against splashing water

IP65

Dust tight and protected against water jets

IP66

Dust protected and protected against powerful water jets.

IP67

Dust protected and protected against immersion in water

IP68

Dust protected and protected against the effects of continuous immersion in water.

CSA

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

UL

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

Orifice

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Degreased

Oil and grease removed typically for oxygen or paint spray use.

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Position Feedback Closed

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Shading Ring - Silver

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Only Show Items In Stock

Hide spare parts

Stainless 2/2 Normally Closed - Pressure Assisted

Filters

66 IN STOCK

6 IN STOCK

63 IN STOCK

13 IN STOCK

13 IN STOCK

96 IN STOCK

7 IN STOCK

99 IN STOCK

2 IN STOCK

1 IN STOCK

2 IN STOCK