Solenoid valve world

General Valves WRAS Natural Gas Valves Wizard Ball Valves Pneumatics Contact Us

Home
Pneumatic air control valves 3/2 - 5/2 - 5/3 way
Pneumatics
3/2 way pneumatic air valves

3/2 Way Pneumatic Air Valves

3/2 way pneumatic directional air valves for compressed air control systems including solenoid operated and mechanical control valves.

Filters

Price

Valve / Product Type

Air Actuated Valve0

air actuated valves that utilise a compressed air supply to operate.

Coaxial Valve0

Manual + Mechanical Control0

Air valves that are controlled manually and mechanically

Safety Shut Off0

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Solenoid Valve0

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

M50

1/8 thread0

valves with 1/8 inch threaded ports

1/4 thread0

valves with 1/4 inch threaded ports

3/8 thread0

valves with 3/8 inch threaded ports

1/2 thread0

valves with 1/2 inch threaded ports

3/4 thread0

valves with 3/4 inch threaded ports

1 thread0

valves with 1 inch threaded ports

Namur mount0

valves with Namur interface mounting

Sub Base Mount0

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Fluid Thick 51>500cSt0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Oils + Fuels 50cSt Max0

Vacuum (Low)0

Vacuum (Medium)0

Water0

Water (RO/Pure/Demin)0

Body Material

Aluminium0

Brass0

Nylon0

Polyphenylene Sulfide (PPS)0

Stainless Steel0

Function

2/2 Failsafe Closed0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

3/2 Normally Closed0

3 ports with 2 positions. Power off inlet closed, outlet open to exhaust - power on inlet open to outlet with exhaust closed.

3/2 Normally Open0

3 ports 2 positions. Inlet open to outlet with exhaust closed - power on inlet closed with outlet open to exhaust.

3/2 Universal0

3 ports, 2 positions flow can be in any direction. Can be piped as 3/2 normally closed flow into inlet, 3/2 normally open flow into exhaust, 3/2 diverting flow into outlet.

4/2 Way0

A 4/2 way valve has four ports and two positions. It controls the direction of flow by switching between two paths in a pneumatic or hydraulic system.

4/3 Way0

A 4/3 way valve has four ports and three positions. It controls the direction of flow by switching between two paths in a pneumatic or hydraulic system with third option all ports closed.

5/2 Single Acting0

5 ports 2 positions (1 inlet, 2 outlets, 2 exhaust ports). Power to coil Cylinder fully extends - Power off cylinder fully retracts (or visa versa)

5/2 Double Acting0

Power to left coil Cylinder fully extends, power to right coil cylinder fully retracts, power off cylinder stays put fully extended or retracted.

Pressure

0.02 Bar (20 mBar)0

0.02 Bar = 20 millibars = 0.29psi = 2 Kpa

0.1 Bar (100 mBar)0

0.1 Bar = 100 millibars = 1.47 psi = 1kPa

0.2 Bar (200 mBar)0

0.2 Bar = 200 millibars = 2.94 psi = 20kPa

0.3 Bar (300 mBar)0

0.3 Bar = 300 millibars = 4.41 psi = 30 kPa

0.4 Bar (400 mBar)0

0.4 Bar = 400 millibars = 4.41 psi = 40 kPa

0.5 Bar (500 mBar)0

0.5 Bar = 500 millibars = 7.36 psi = 50 kPa

0.6 Bar (600 mbar)0

0.6 Bar = 600 millibars = 8.83 psi = 60 kPa

0.7 Bar (700 mBar)0

0.7 Bar = 700 millibars = 10.3 psi = 70 kPa

0.8 Bar (800 mBar)0

0.8 Bar = 800 millibars = 11.77 psi = 80 kPa

1 Bar0

1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa

1.2 Bar0

1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa

1.3 Bar0

1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa

1.4 Bar0

1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa

1.5 Bar0

1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa

1.6 Bar0

1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa

2 Bar0

2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa

2.5 Bar0

2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

12 Bar0

12 Bar = 176.52 psi = 1.2 MPa

13 Bar0

13 Bar = 191.23 psi = 1.3 MPa

14 Bar0

14 Bar = 205.94 psi = 1.4 MPa

15 Bar0

15 Bar = 220.65 psi = 1.5 MPa

16 Bar0

16 Bar = 235.36 psi = 1.6 MPa

25 Bar0

25 Bar = 367.8 psi = 2.5 MPa

30 Bar0

30 Bar = 441.3 psi = 3 MPa

50 Bar0

50 Bar = 735.5 psi = 5 MPa

60 Bar0

60 Bar = 882.6 psi = 6 MPa

64 Bar0

64 Bar = 941.4 psi = 6.4 MPa

100 Bar0

100 Bar = 1471 psi = 10 MPa

120 Bar0

120 Bar = 1765.2 psi = 12 MPa

130 Bar0

130 Bar = 1912.3 psi = 13 MPa

135 Bar0

140 Bar0

140 Bar = 2059.4 psi = 14 MPa

150 Bar0

150 Bar = 2206.5 psi = 15 MPa

160 Bar0

160 Bar = 2353.6 psi = 16 MPa

200 Bar0

200 Bar = 2942 psi = 20 MPa

225 Bar0

225 Bar = 3309.75 psi = 22.5 MPa

270 Bar0

270 Bar = 3971.7 psi = 27 MPa

300 Bar0

300 Bar = 4413 psi = 30 MPa

Seals

EPDM0

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

FFKM (Kalrez)0

FF-KM Perfluoroelastomer - known as Kalrez, Chemraz or Perlast. Good most Solvents, Chemicals + excellent resistance to almost every thing, far surpassing FKM. -40°C to +250°C.

HNBR0

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

PTFE (Teflon)0

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Voltage

6vDC0

6 volts Direct Current

12vDC0

12 volts Direct Current

12vAC0

12 volts 50/60Hz Alternating Current

24vDC0

24 volts Direct Current

24vAC0

24 volts 50/60Hz Alternating Current

36vAC0

36 volts 50/60Hz alternating current

48vAC0

48 volts 50/60Hz alternating current

48vDC0

48 volts Direct Current

110vAC0

110 volts 50/60Hz Alternating Current

110vDC0

110 volts Direct Current

230VAC0

230 volts 50/60Hz Alternating Current

200vDC0

200 volts Direct Current

380vAC0

380 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

ATEX Exm0

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd0

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

ATEX Exia0

ATEX protection by intrinsic safety, II 2 G Ex ia IIB/IIC T4 or T6.

IP540

Dust protected and protected against splashing water

IP650

Dust tight and protected against water jets

IP660

Dust protected and protected against powerful water jets.

IP670

Dust protected and protected against immersion in water

IP680

Dust protected and protected against the effects of continuous immersion in water.

CSA0

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

CUTR0

CUTR approval stands for "Center for Urban Transportation Research" approval, indicating compliance with transportation standards and regulations for projects or products.

SIL30

SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.

UL0

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

Orifice

0.7mm0

Valve orifice or sealing face with diameter 0.7mm

0.8mm0

Valve orifice or sealing face with diameter 0.8mm

1.0mm0

Valve orifice or sealing face with diameter 1mm

1.1mm0

Valve orifice or sealing face with diameter 1.1mm

1.2mm0

Valve orifice or sealing face with diameter 1.2mm

1.3mm0

Valve orifice or sealing face with diameter 1.3mm

1.4mm0

Valve orifice or sealing face with diameter 1.4mm

1.5mm0

Valve orifice or sealing face with diameter 1.5mm

1.6mm0

Valve orifice or sealing face with diameter 1.6mm

1.8mm0

Valve orifice or sealing face with diameter 1.8mm

2.0mm0

Valve orifice or sealing face with diameter 2mm

2.2mm0

Valve orifice or sealing face with diameter 2.2mm

2.4mm0

Valve orifice or sealing face with diameter 2.4mm

2.5mm0

Valve orifice or sealing face with diameter 2.5mm

3.0mm0

Valve orifice or sealing face with diameter 3mm

3.5mm0

Valve orifice or sealing face with diameter 3.5mm

4.0mm0

Valve orifice or sealing face with diameter 4mm

5.0mm0

Valve orifice or sealing face with diameter 5

5.5mm0

Valve orifice or sealing face with diameter 5.5mm

6.0mm0

Valve orifice or sealing face with diameter 6mm

6.5mm0

Valve orifice or sealing face with diameter 6.5mm

7mm0

Valve orifice or sealing face with diameter 7mm

7.5mm0

Valve orifice or sealing face with diameter 7.5

8.0mm0

Valve orifice or sealing face with diameter 8mm

9.0mm0

Valve orifice or sealing face with diameter 9mm

9.5mm0

Valve orifice or sealing face with diameter 9.5mm

11mm0

Valve orifice or sealing face with diameter 11mm

15mm0

Valve orifice or sealing face with diameter 15mm

Operation

Direct Acting0

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted0

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Banjo0

allows fluid to flow through the central hole in the banjo bolt and exit through the radial holes, facilitating connections in tight spaces or where angular adjustments are needed

Bi-Directional Flow0

Can control flow in both directions

Degreased0

Oil and grease removed typically for oxygen or paint spray use.

Manifold0

A group of multiple valves together on one manifold, simple layout streamline control and space saving.

Manual Control0

Valves that require manual input to operate such as lever, button or switch

Manual Override0

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Manual Reset0

A facility that prevents a valve from returning to its previous position without manual intervention by a lever or button. Typically used for safety systems.

Mounting Bracket0

Valve has the facility to be supplied with a bracket for mounting and securing.

Mounting Holes0

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Outlet - right angle0

The outlet port is at right angles to inlet port, ideal for space efficiency.

Panel Mount0

Valve is designed to be mounted and secured into an instrument panel

Position Feedback Closed0

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed0

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Shading Ring - Silver0

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without0

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Only Show Items In Stock

Hide spare parts

Showing 1 - 20 of 41 total products

1/4 BSP 3/2 Pneumatic Valve Push Button / Twist 0–9 Bar £31.75 £26.89 inc VAT

70 IN STOCK

1/8→1/4"BSP 3/2 Pneumatic Solenoid Valve Single 18/22mm Body £38.90 £25.69 inc VAT

101 IN STOCK

NAMUR 3/2 5/2 Air Solenoid Valve 1.5–10 Bar Single Acting £70.50 £35.26 inc VAT

228 IN STOCK

1/8 & 1/4" Solenoid valve 0-8 Bar 3/2 Normally Closed £44.52 £35.90 inc VAT

702 IN STOCK

15mm 3/2 Pneumatic Solenoid Valve 0–10 Bar Normally Closed £16.85 £12.29 inc VAT

446 IN STOCK

1/8 BSP 3/2 Pneumatic Valve Mechanical Control 0–9 Bar £31.50 £26.68 inc VAT

94 IN STOCK

3/2 Pneumatic Solenoid Valve Single Acting 1/4–1/2 BSP £46.84 £30.91 inc VAT

79 IN STOCK

Pneumatic Foot Pedal Valve 3/2 or 5/2 Air Control 0–9 Bar £74.46 £49.14 inc VAT

66 IN STOCK

3/2 Pneumatic Air Pilot Valve Single Acting 1/8-1/2 BSP £31.68 £22.99 inc VAT

62 IN STOCK

1/8 BSP 3/2 Pneumatic Valve Push Button / Twist 0–9 Bar £24.54 £20.77 inc VAT

6 IN STOCK

1/8–1/4 BSP Brass 3/2 Solenoid Valve 0–15 Bar NC, NO & U £88.48 £62.29 inc VAT

253 IN STOCK

1/8-1/4 BSP 3/2 Pneumatic Hand Lever Valve Spring / Detent £33.80 £27.26 inc VAT

27 IN STOCK

4/2 & 4/3 Pneumatic Rotary Lever Valve 1/4–1/2 BSP 0–9 Bar £42.97 £31.51 inc VAT

41 IN STOCK

1/8 1/4 Banjo solenoid valve 0-8 Bar 3/2 Normally Closed £60.89 £44.65 inc VAT

72 IN STOCK

M5 1/8 Brass solenoid valve 0-8 Bar 3/2 Normally Closed £51.55 £41.80 inc VAT

16 IN STOCK

1/8 1/4 ATEX Exia solenoid valve 0-12 Bar 2/2 3/2 N/Closed £180.29 £130.91 inc VAT

110 IN STOCK

¼" Brass solenoid valve 0-11 Bar 3/2 N/C, N/Open, Universal £74.22 £49.72 inc VAT

175 IN STOCK

1/8 1/4 Stainless solenoid valve 0-300 Bar 2/2 N/Closed £849.16 £560.45 inc VAT

NAMUR 3/2 5/2 Air Solenoid Valve 1.5–10 Bar Double Acting £106.66 £53.33 inc VAT

101 IN STOCK

1/4 ATEX Exd Stainless solenoid valve 0-10 Bar 3/2 Universal £455.57 £242.47 inc VAT

7 IN STOCK

1
2
3

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
[email protected]

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

ATEX Valves Search by Brand Breathing Air Filters High Pressure Valves Clearance Items WRAS Valves New Products Information Chemical Compatibility Guide

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2026 Connexion Developments Ltd, All rights reserved.