Solenoid valve world

Solenoid Valves WRAS Natural Gas Valves Wizard Motorised Valves Pneumatics Contact Us

Home
Stainless 2/2 normally closed - pressure assisted
Stainless solenoid valves - 2/2 n/c
2, 3 & 5 way ss valves nc no & latching
Stainless solenoid valves
Solenoid valves
Spu225 stainless solenoid valves

SPU225 Stainless Solenoid Valves

SPU225 solenoid valve Body: 316 stainless steel, Pressure: 0.5 to 15 Bar, Function 2/2 way normally closed, normally open or latching bi-stable function. Seals: Viton, NBR, EPDM or HNBR, Coil: IP65 safe area or ATEX EExmIIT4, Port: 3/8 to 2" BSP, NPT or Flange.

Filters

Price

Port Size

3/8 thread0

valves with 3/8 inch threaded ports

3/8 Flange DN100

1/2 thread0

valves with 1/2 inch threaded ports

1/2 inch Flange DN150

3/4 thread0

valves with 3/4 inch threaded ports

3/4 Flange DN200

1 thread0

valves with 1 inch threaded ports

1 inch Flange DN250

11/4 thread0

valves with 11/4 inch threaded ports

11/4 inch Flange DN320

11/2 thread0

valves with 11/2 inch threaded ports

11/2 inch Flange DN400

2 thread0

valves with 2 inch threaded ports

2 inch Flange DN500

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Oils + Fuels 50cSt Max0

Water0

Water (RO/Pure/Demin)0

Pressure

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

Seals

EPDM0

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

HNBR0

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Voltage

6vDC0

6 volts Direct Current

12vDC0

12 volts Direct Current

12vAC0

12 volts 50/60Hz Alternating Current

24vDC0

24 volts Direct Current

24vAC0

24 volts 50/60Hz Alternating Current

48vAC0

48 volts 50/60Hz alternating current

48vDC0

48 volts Direct Current

110vAC0

110 volts 50/60Hz Alternating Current

110vDC0

110 volts Direct Current

230VAC0

230 volts 50/60Hz Alternating Current

200vDC0

200 volts Direct Current

380vAC0

380 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

ATEX Exm0

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd0

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

IP540

Dust protected and protected against splashing water

IP650

Dust tight and protected against water jets

IP660

Dust protected and protected against powerful water jets.

IP670

Dust protected and protected against immersion in water

IP680

Dust protected and protected against the effects of continuous immersion in water.

Orifice

13mm0

Valve orifice or sealing face with diameter 13mm

25mm0

Valve orifice or sealing face with diameter 25mm

38mm0

Valve orifice or sealing face with diameter 38mm

50mm0

Valve orifice or sealing face with diameter 50mm

Options required

Degreased0

Oil and grease removed typically for oxygen or paint spray use.

Shading Ring - Silver0

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without0

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Only Show Items In Stock

Hide spare parts

Showing 1 - 14 of 14 total products

1/2" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

84 IN STOCK

£145.20 inc VAT

1" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

78 IN STOCK

£217.80 inc VAT

11/2" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

£290.40 inc VAT

3/4" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

95 IN STOCK

£217.79 inc VAT

DN15 Stainless steel solenoid valve 0.5-15 Bar 2/2 N/Closed

£296.34 inc VAT

11/4" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

17 IN STOCK

£290.39 inc VAT

3/8" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

47 IN STOCK

£145.19 inc VAT

DN40 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed

£646.66 inc VAT

2" Stainless Steel Solenoid Valve 0.5-15 Bar 2/2 N/Closed

10 IN STOCK

£435.60 inc VAT

DN50 Flange stainless solenoid valve 0.5-15 Bar 2/2 N/Closed

£791.90 inc VAT

DN10 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed

£296.34 inc VAT

DN20 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed

£406.68 inc VAT

DN25 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed

£406.68 inc VAT

DN32 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed

£646.66 inc VAT

1

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
[email protected]

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

Clearance Items WRAS Valves New Products Information Chemical Compatibility Guide

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2026 Connexion Developments Ltd, All rights reserved.