Valve / Product Type

Air Filters

Removes debris + 90% oil / moisture from compressed air systems.

Air Filter/Regulators

Air pressure regulator + air filter provides stable adjustable outlet pressure and remove debris and 90% oil + moisture.

Air Filter Regulator Lubricator

Air pressure regulator with air filter with air lubrication system. Provides stable outlet pressure whilst removing debris and 90% moisture the finally providing oil mist to lubricate downstream equipment.

Air Lubricators

Provides lubricating oil by misting system into to lubricate downstream equipment.

Air Regulators

Air pressure regulator regulates and provides stable outlet pressure.

Air Actuated Valve

air actuated valves that utilise a compressed air supply to operate.

AirLine Fittings + Tube

compressed air line tubing and push to connect fittings

Coaxial Valve

Manual Control

Air valves that are controlled manually

Pressure Reducing

Pressure reducing valves (PRV) reduce and maintain stable outlet pressure

Pressure Relief

Safety pressure relief / pressure limiting valve (PLV), stays closed until pressure reaches set pressure - then quickly opens, releasing any excess pressure.

Pressure Sustaining

Pressure sustaining / back pressure valve, maintains a minimum preset upstream (Inlet) pressure, valve will close if pressure drops to set pressure and reopens when inlet pressure increases again.

Solenoid Valve

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

Media

Body Material

Function

2/2 Normally Closed

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Normally Open

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

Proportional / Modulating

Valve opens proportionally according to signal input, either 4-20mA, 0-10v or 0-5 volt. Example 4mA valve closed, 8mA 25% open, 12mA 50% open, 18mA 75% open and 20mA fully open.

Pressure Maximum

Seals

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Voltage

12vDC

12 volts Direct Current

24vDC

24 volts Direct Current

24vAC

24 volts 50/60Hz Alternating Current

110vAC

110 volts 50/60Hz Alternating Current

230VAC

230 volts 50/60Hz Alternating Current

Approvals (EN,Ex,IP,CSA,UL etc)

ATEX Zone II GD

hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.

ATEX ExnA

certifies equipment for use in potentially explosive atmospheres, indicating it is designed to prevent ignition sources, minimizing risk.

IP65

Dust tight and protected against water jets

IP66

Dust protected and protected against powerful water jets.

FDA

FDA approval is the process by which the Food and Drug Administration evaluates and authorizes the marketing of new drugs, medical devices, and biologics for safety and efficacy.

NACE MR-01-75.

Orifice

Operation

Direct Acting

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Manual Control

Valves that require manual input to operate such as lever, button or switch

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Bracket

Valve has the facility to be supplied with a bracket for mounting and securing.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Outlet - right angle

The outlet port is at right angles to inlet port, ideal for space efficiency.

Panel Mount

Valve is designed to be mounted and secured into an instrument panel

Spares (Coils, Connectors, Seals)

Only Show Items In Stock

Hide spare parts

Pressure Control

Pressure Reducing Valves

Pressure Sustaining Valves

Pressure Relief Valves

Filters

66 IN STOCK

200 IN STOCK

46 IN STOCK

146 IN STOCK

114 IN STOCK

57 IN STOCK

61 IN STOCK

28 IN STOCK

27 IN STOCK

15 IN STOCK

6 IN STOCK

6 IN STOCK

3 IN STOCK

10 IN STOCK

4 IN STOCK

101 IN STOCK

10 IN STOCK