Description
Clear DIN 43650 Form A Electrical Connector PG9 – IP65
Clear housing EN 175301-803 Form A electrical connector designed for standard solenoid valves, solenoid coils and industrial control equipment.
This standard 28mm square DIN 43650A / ISO 4400 Form A connector provides a simple 2 pin + earth electrical connection without LED indication, rectification or surge suppression circuitry.
Rated for electrical supplies from 0–250V AC/DC with a maximum current rating of 16A, the connector is suitable for a wide range of industrial solenoid valve applications.
The transparent housing allows the internal terminal arrangement to remain visible, while the PG9 cable entry accepts 6–8mm diameter cable. When correctly assembled, the connector provides IP65 ingress protection.
Electrical Specification
Connector type: Form A
Standard: EN 175301-803
Alternative standards: DIN 43650A / ISO 4400
Connector format: 28mm square
Electrical connection: 2 pin + earth
Voltage range: 0–250V AC/DC
Maximum current: 16A
Circuit: None
LED indicator: None
Rectifier: None
Surge suppression: None
Clear Housing
Unlike conventional black DIN electrical connectors, this version incorporates a clear transparent housing.
The transparent construction provides visibility of the internal terminal block and electrical connection while retaining the familiar DIN Form A configuration used on industrial solenoid valves and coils.
No-Circuit DIN Connector
This connector contains no internal electrical circuit, making it suitable for straightforward AC or DC connection where additional electronic functions are not required.
There is:
✓ No LED indicator
✓ No VDR varistor
✓ No TVS suppression
✓ No bridge rectifier
This makes it a simple general-purpose electrical connector for compatible DIN Form A solenoid coils.
Cable Connection
Cable entry: PG9
Suitable cable diameter: 6–8mm
The PG9 gland provides cable retention and sealing when correctly assembled with a suitable 6–8mm diameter electrical cable.
Environmental Protection
Protection rating: IP65
When correctly assembled to a compatible solenoid coil or valve operator, the connector provides IP65 protection for industrial environments.
DIN 43650A / EN 175301-803 Form A
The DIN 43650A, now commonly referenced as EN 175301-803 Form A, electrical interface is widely used on industrial solenoid valves and coils.
The standard 28mm square format makes this connector suitable for compatible Form A connections used across pneumatic, hydraulic, water, gas and general industrial fluid-control equipment.
Typical Applications
✓ Solenoid valves
✓ Solenoid valve coils
✓ Pneumatic valves
✓ Hydraulic valves
✓ Water control valves
✓ Process control equipment
✓ Industrial automation
✓ OEM machinery
✓ Fluid control systems
✓ General industrial equipment
Why Choose This Clear DIN Form A Connector?
This clear DIN Form A connector provides a simple and economical electrical connection for compatible solenoid valves requiring no LED or suppression circuit.
With a broad 0–250V AC/DC rating, maximum current capacity of 16A, PG9 cable entry and IP65 protection, it provides a versatile replacement or spare electrical connector for industrial solenoid valve installations.
The transparent housing also distinguishes it visually from conventional black DIN connectors and allows the internal terminal arrangement to remain visible.
Related Products & Categories
