P3017V01-R-5-2G-B5-M6+IV-24V-DC-62-MS-H-01

Key Features

ATEX & IECEx Ex ia Certified
Intrinsically Safe Solenoid Valve
3/2 Way Universal Operation
NC, NO, Diverting or Mixing
Direct Acting Valve Design
Zero Pressure Differential
Vacuum to 10 Bar Operation
High Vacuum to 10⁻⁶ Torr
1/4" BSP Connection
Optional 1/4" NPT Connection
Large 5mm Flow Orifice
8 L/min Water Flow
≤12ms ON / OFF Response
316 Stainless Steel CF8 Body
316 Stainless Steel Internals
Bubble-Tight Shut-Off
Vibration Resistance to 9G
Up to 900 Cycles per Minute
>20 Million Cycle Life
Mountable in Any Position
Ex ia IIC Gas Protection
Ex ia IIIC Dust Protection

Datasheets

Description

ATEX Ex ia 3/2 Universal Solenoid Valve – Rotex P3017V01R-5

The Rotex P3017V01R-5 is a high-performance ATEX and IECEx Ex ia intrinsically safe 3/2 universal solenoid valve designed for hazardous-area applications requiring exceptionally fast response, long service life and flexible flow control.

Its universal 3-way configuration allows the valve to be piped for normally closed, normally open, diverting or mixing duties. Direct acting operation provides reliable switching from high vacuum through to 10 Bar without requiring a minimum pressure differential.

Manufactured as standard with a 316 stainless steel CF8 body and 316 stainless steel internals, the P3017V01R-5 offers bubble-tight shut-off, 9G vibration resistance, switching speeds up to 900 cycles per minute and a life expectancy exceeding 20 million cycles.

Valve Function & Operation

Function: 3/2 way universal

Operation: Direct acting

The universal three-port design provides considerable flexibility from a single valve and can be piped for:

3/2 Normally Closed – primary flow is closed in the de-energised condition.

3/2 Normally Open – primary flow remains open in the de-energised condition.

Diverting – one inlet can be switched between two alternative outlets.

Mixing – two inlet paths can be switched towards a common outlet.

As a direct acting valve, the P3017V01R-5 operates from zero pressure differential, making it suitable for vacuum as well as positive-pressure applications.

Pressure, Orifice & Flow

Operating pressure: 0 to 10 Bar

Vacuum capability: Down to 10⁻⁶ Torr

Orifice: 5mm

Water flow: 8 L/min at 1 Bar ΔP

Response ON: ≤12ms

Response OFF: ≤12ms

The combination of a 5mm orifice and extremely fast response provides excellent performance for high-speed process and instrumentation applications.

Ports & Connections

Standard connection: 1/4" BSP

Optional connection: 1/4" NPT

The NPT option allows straightforward integration into international, offshore and OEM installations using NPT pipework.

Construction & Materials

Standard body: 316 stainless steel CF8

Optional bodies: Brass or aluminium

Internals: 316 stainless steel

Shading ring: None

Standard seal: NBR

Optional seals:

FKM Viton® GLT

Fluorosilicone

Media compatibility should be confirmed against the selected sealing material and valve materials of construction.

Media Compatibility

Suitable media include:

High vacuum

Air

Water

Gases

Compatible process fluids

The valve is particularly useful where vacuum capability and rapid switching are required within an intrinsically safe control system.

High-Speed Performance

The P3017V01R-5 offers particularly impressive mechanical performance for a hazardous-area valve:

Response time: ≤12ms ON / ≤12ms OFF

Maximum cycling: 900 cycles/minute

Life expectancy: >20 million cycles

Vibration resistance: Up to 9G

Shut-off: Bubble tight

Mounting: Any position

This makes it particularly suitable for demanding automated applications involving frequent or rapid switching.

ATEX & IECEx Intrinsic Safety

The solenoid operator is certified for intrinsically safe operation in hazardous gas and dust atmospheres.

Approvals: ATEX & IECEx

IECEx certificate: IECEx BAS 12.0128X – Issue 1

ATEX certificate: Baseefa12ATEX0243X – Issue 1

Gas marking:

Ex ia IIC T5 Ga

-60°C ≤ Ta ≤ +75°C

Ex ia IIC T6 Ga

-60°C ≤ Ta ≤ +60°C

Dust marking:

Ex ia IIIC T200 125°C IP67 Da

-60°C ≤ Ta ≤ +75°C

The Ga and Da equipment protection levels make this operator suitable for applications requiring a very high level of explosion protection, subject to installation in accordance with its certification.

Intrinsically Safe Electrical Parameters

Minimum operating parameters:

Voltage: 12.5V

Current: 25.5mA

Power: 0.3W

Entity parameters:

Ui: 32V DC

Ii: 230mA

Pi: 2.3W

Li: 0

Ci: 0

The associated intrinsically safe barrier or galvanic isolator must be selected to comply with these certified entity parameters and the requirements of the complete hazardous-area circuit.

Typical Applications

The Rotex P3017V01R-5 is particularly suited to hazardous-area applications involving process instrumentation, analyser systems, oil and gas equipment, petrochemical plants, chemical processing, pneumatic control circuits, high-vacuum systems, process skids, offshore installations and OEM machinery.

Its ≤12ms response and >20 million cycle life make it especially attractive for high-frequency applications where conventional hazardous-area valves may be too slow.

Why Choose the Rotex P3017V01R-5?

The major advantage of the P3017V01R-5 is the combination of Ex ia intrinsic safety, universal 3/2 operation and extremely fast direct acting performance.

One valve can provide normally closed, normally open, diverting or mixing control while operating from high vacuum to 10 Bar. Combined with a 5mm orifice, ≤12ms response, 900 cycles/minute capability, 9G vibration resistance and a life expectancy exceeding 20 million cycles, it provides an unusually capable solution for demanding hazardous-area control systems.

Related Products & Categories.

High Pressure Solenoid Valves

ATEX Solenoid Valves

View Technical Specification

Technical Specification

Brand: Rotex

Model: P3017V01-R-5

Width: 30.00 mm

Height: 103.00 mm

Depth: 55.00 mm

Weight: 1.00 kg

Valve / Product Type: Solenoid Valve

Body Material: Stainless Steel

Voltage: 24vDC

Port Size: 1/2 thread, 1/4 thread

Function: 3/2 Normally Closed, 3/2 Normally Open, 3/2 Universal

Operation: Direct Acting from 0 Pressure

Pressure: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar

Seals: EPDM, NBR, FKM (Viton)

Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)

Options required: Degreased, Manual Override, Mounting Holes, Shading Ring - Silver, Shading Ring - without

Orifice: 5.0mm

Approvals:: ATEX Exia, IP65, IP66, IP67, SIL3

Found in these Categories

ATEX Exia Stainless solenoid valve 0-10 Bar 3/2 Universal

Name: ATEX Exia Stainless solenoid valve 0-10 Bar 3/2 Universal
Brand: Rotex
SKU: P3017V01-R-5
Price: 698.27 GBP
Availability: InStock

£698.27 incl. VAT £581.89 ex. VAT

-47% Was ~~£1,311.89~~ incl. VAT

Select Port Size / Thread

Add To Cart

Brand: Rotex

Model: P3017V01-R-5

Stock: 2 in stock

Add to your wishlist

Read Full Description

Key Features

Datasheets

Description

ATEX Ex ia 3/2 Universal Solenoid Valve – Rotex P3017V01R-5

Valve Function & Operation

Pressure, Orifice & Flow

Ports & Connections

Construction & Materials

Media Compatibility

High-Speed Performance

ATEX & IECEx Intrinsic Safety

Intrinsically Safe Electrical Parameters

Typical Applications

Why Choose the Rotex P3017V01R-5?

Related Products & Categories.

Technical Specification

Found in these Categories

ATEX Exia Stainless solenoid valve 0-10 Bar 3/2 Universal

Related Products

6 IN STOCK

80 IN STOCK

7 IN STOCK

12 IN STOCK

2 IN STOCK

6 IN STOCK

80 IN STOCK

6 IN STOCK

8 IN STOCK

12 IN STOCK

9 IN STOCK