Key Features

Direct-acting 2/2 way normally closed design
Zero pressure operation from 0 Bar
No minimum pressure differential required
Vacuum rated to −101 kPa (approximately 99.7% vacuum)
Maximum working pressure up to 15 Bar
Choice of 4mm, 6mm or 8mm orifice
Brass body with stainless steel internals
FKM (Viton®) seals as standard
Wide range of alternative seal materials
WPG2 18 Watt Class H coil
UL / CSA approved coil as standard
100% continuous duty rated
IP67 protection with connector fitted
Optional manual override
Optional oxygen-degreased version
Optional ATEX / IECEx hazardous-area coil

Datasheets

Description

CS Fluid Power Direct-Acting Normally Closed Solenoid Valve

The CS Fluid Power AD10 is a compact 3/8" direct-acting 2/2 way normally closed brass solenoid valve designed for vacuum, zero-pressure and general industrial fluid control applications.

Unlike conventional pilot-operated valves, the direct-acting design requires no minimum pressure differential, allowing reliable operation from 0 Bar and vacuum duties while offering working pressures up to 15 Bar depending on the selected orifice, voltage and coil.

Available with 4mm, 6mm or 8mm orifices, the AD10 series combines a brass body, stainless steel internals and FKM sealing as standard, with a wide range of alternative seal materials for different fluids, gases and application requirements.

Valve Function & Operation

Function: 2/2 way normally closed

Operation: Direct acting (zero rated)

Thread: 3/8" BSPP standard

Optional thread: NPT

Pressure range: 0 to 15 Bar (coil, voltage and orifice dependent)

Vacuum rating: 0 to −101 kPa (approximately 99.7% vacuum)

No minimum pressure differential required

Construction & Materials

Body: Brass

Internals: Stainless steel

Seals (standard): FKM (Viton®)

Optional seals: EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl (IIR)

Orifice & Flow

AD10A: 4.0mm orifice

AD10B: 6.0mm orifice

AD10C: 8.0mm orifice

Flow rate: 9.7 to 16.1 L/min

Based on water with 1 Bar pressure drop.

Media Compatibility

Air and inert gases

Water

Light oils and fuels

Vacuum applications

Non-corrosive fluids compatible with brass and selected seal materials

Oxygen service when specified and degreased

Temperature Limits

Maximum media temperature: Up to +185°C depending upon selected seal and coil configuration

NBR: Up to +100°C

FKM (Viton®): Up to +120°C

EPDM: Up to +120°C

Silicone: Up to +120°C

PTFE / VST: Up to +185°C subject to valve and coil configuration

Ambient temperature: -10°C to +50°C

Coil & Electrical

Coil: WPG2

Power: 18 Watt

Insulation: Class H

UL / CSA approved as standard

Duty cycle: 100% continuous rated

Connector: DIN 43650A with IP67 LED connector

Overall protection: IP67

Manual override available (optional)

Degreased version available for oxygen service

Voltage Options

DC: 12V, 24V or 48V

AC: 24V, 48V, 110V or 230V (50/60 Hz)

ATEX / IECEx Coil Option

Optional Nass Magnet explosion-protected solenoid operator available.

✓ Ex mb IIC T4 Gb

✓ Ex mb tb IIIC T130°C Db

✓ Suitable for Zone 1 gas and Zone 21 dust hazardous areas

✓ ATEX Category 2G / 2D

✓ Protection rating: IP65

✓ Maximum media temperature: +80°C

✓ ATEX Certificate: PTB 03 ATEX 2086 X

✓ IECEx Certificate: IECEx PTB 05.0005X

✓ ATEX Directive: 2014/34/EU

Maximum operating pressure with ATEX coil: 70% of applicable DC pressure rating.

Benefits

Zero-pressure direct-acting operation

Vacuum capable to −101 kPa

Working pressure up to 15 Bar

Choice of three orifice sizes

Compact high-flow design

Wide range of seal material options

UL / CSA approved coil as standard

Optional oxygen-cleaned construction

Optional ATEX / IECEx hazardous-area version

Reliable continuous-duty operation

Fast UK delivery available

Special Options

Manual override option

Degreased version available for oxygen service

Alternative seal materials

ATEX / IECEx explosion-protected coil

Custom configurations available on request

Applications

Vacuum systems

Pneumatic control circuits

Compressed air systems

Water and fluid control

Low and medium-pressure gas systems

Light oil and fuel control

Oxygen service with degreased version

OEM machinery and test equipment

General-purpose industrial automation

Related Products & Categories

ATEX Solenoid Valves

DIN43650 Connectors

Plastic Solenoid Valves

Vacuum Solenoid Valves

3/8" Brass Solenoid Valves

Replacement Solenoid Coils

3/8" Stainless Solenoid Valves

View Technical Specification

Technical Specification

Brand: CS Fluid Power Co Ltd

Model: AD10

Width: 25.00 mm

Height: 90.00 mm

Depth: 50.00 mm

Weight: 0.73 kg

Valve / Product Type: Solenoid Valve

Body Material: Brass

Voltage: 110vAC, 110vDC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC

Port Size: 3/8 thread

Function: 2/2 Failsafe Closed

Operation: Direct Acting

Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST

Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (High), Vacuum (Low), Vacuum (Medium), Water

Options required: Degreased, Manual Override, Mounting Holes, Shading Ring - without

Orifice: 4.0mm, 6.0mm, 8.0mm

Approvals:: ATEX Exm, IP54, IP65, IP66, IP67, CSA, UL

Pressure: Vacuum, 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar

Found in these Categories

3/8" Brass Solenoid Valve 0–15 Bar 2/2 Normally Closed

Name: 3/8" Brass Solenoid Valve 0–15 Bar 2/2 Normally Closed
Brand: CS Fluid Power
SKU: AD10A,AD10B,AD10C
Price: 74.97 GBP
Availability: InStock