1/8 1/4 Brass Solenoid Valve 0-30 Bar 2/2 Normally Closed 1-3mm (ATEX option)
£44.70
incl. VATDescription
1/8 1/4 inch Brass 2/2 solenoid valve BS04 BS06
Function: 2/2 way normally closed
Operation: direct acting
Port: 1/8 or 1/4 BSP thread, option NPT or Rc thread
Body: Brass
Internals: stainless steel
Pressure: 0 to 30 Bar according to orifice and coil
Vacuum: 10-2 Torr, 10-1Torr or 10 Torr according to orifice (Not with PTFE seal)
Temperature: -20C to +145C according to seal and coil
Orifice: 1.0mm, 1.3mm, 1.6mm, 2.0mm, 2.5mm or 3mm
Kv flow factor: 0.5 to 4.5 l/min according to orifice
Seals: NBR, FKM, EPDM, PTFE or FFKM
Media: Vacuum, air, water, light oils and other fluids under 50 CST and gases compatible with materials of construction.
Coil: 6 Watt Nass Magnet system 8/22 power level 5 DIN43650B 100% duty rated
Coil: 6.8 Watt Nass Magnet system 8/30 power level 6 DIN43650A 100% duty rated.
Coil 22002EX: ATEX 5 Watt 8/30 EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.
Technical Specification
Brand: AAA (Sunwell)
Model: BS04,BS06
Width: 30.00 mm
Height: 60.00 mm
Depth: 35.00 mm
Weight: 0.20 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 1/4 Inch, 1/8 Inch
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar
Seals: EPDM, FFKM (Kalrez), NBR, PTFE (Teflon), FKM (Viton)
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Air, Fluid >50cSt (Non Aggressive), Gases (Non Aggressive), Oils + Fuels >50cSt Max, Vacuum (Low), Water
Options required: Degreased, Mounting Bracket, Mounting Holes
Orifice: 1.0mm, 1.3mm, 1.6mm, 2.0mm, 2.5mm, 3.0mm