DN15-50 Flanged cast steel solenoid valve 0-25 Bar 2/2 N/Closed (860AG2) 15-50mm

£1,347.43

£1,662.06 incl. VAT
£1,122.86 ex. VAT

Brand: RSG regel-und steuergeräte gmbh

Model: 860CS

Stock: 0 in stock

Read Full Description

Description

Flanged Cast Steel solenoid valve 860CS (860AG2)
Function: 2/2 way normally closed
Operation: Direct Acting (forced pilot)
Port Sizes: DN15, DN20, DN25, DN32, DN40 and DN50 PN16 flange, option PN40
Body: Cast Steel GSC25N
Internals: stainless steel
Seals: NBR, EPDM or FKM, option PTFE
Temperature: +130°C Max
Opening time: 1 second Max
Closing time: 0.5 Seconds Max
Media: air, water, oil and vacuum, other fluids under 50CST and gases compatible with materials of construction.
Pressure: 0 to 25 Bar according to orifice and coil
Orifice: 15mm, 20mm, 25mm, 32mm, 40mm or 50mm according to port size
Kv flow factor: 117 to 633 L/min according to orifice size based on water with 1 Bar pressure difference.
Coil 1: 30 Watt 60mm diameter 100% duty rated IP65 with connector 100% duty rated.
Coil 2: 60 Watt 70mm diameter 100% duty rated IP65 with connector 100% duty rated.
Options: ATEX EExemIIT4 2G & 2D IP65 T130°C, Open and Closed Position switches and manual Over Ride.

Technical Specification

Brand: RSG regel-und steuergeräte gmbh

Model: 860CS

Width: 95.00 mm

Height: 165.00 mm

Depth: 130.00 mm

Weight: 5.35 kg

Valve / Product Type: Solenoid

Body Material: Steel

Voltage: 110vAC, 110vDC, 200vDC, 230VAC, 24vAC, 24vDC

Port Size: 1/2 inch Flange DN15, 3/4 Flange DN20, 1 inch Flange DN25, 11/4 inch Flange DN32, 11/2 inch Flange DN40, 2 inch Flange DN50

Function: 2/2 Normally Closed

Operation: Direct Acting

Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar

Seals: EPDM, NBR, PTFE (Teflon), FKM (Viton)

Approvals: ATEX Zone II GD, ATEX Exm, IP65

Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (Low), Water

Options required: Anti Water Hammer, Position Feedback Closed, Position Feedback Open+Closed

Orifice: 15mm, 20mm, 25mm, 32mm, 40mm, 50mm