Solenoid valve world

General Valves WRAS Natural Gas Wizard Ball Valves Pneumatics Contact Us

Home
Solenoid valves by size
All flanged solenoid valves dn10 to dn300+

All flanged solenoid valves DN10 to DN300+

Flanged PN16, ANSI150Lb and JIS10K solenoid valves 2/2 way normally closed and normally open manufactured from Brass, Bronze, Aluminium, Cast Iron, Ductile Iron, Cast Steel and Stainless Steel to suit most air, water, natural gas, biogas, steam, fluid and gas application. IP65 and ATEX available.

Show Sub Categories

Flanged DN10 3/8 inch solenoid valves manufactured in Brass and Stainless steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN10 Flange solenoid valves

Flanged DN15 1/2 inch solenoid valves manufactured in Brass, Stainless steel, Iron and steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN15 Flange solenoid valves

Flanged DN20 3/4 inch solenoid valves manufactured in Brass, Stainless steel, Iron and steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN20 Flange solenoid valves

Flanged DN25 1 inch solenoid valves manufactured in Brass, Stainless steel, Iron and steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN25 Flange solenoid valves

Flanged DN32 11/4 inch solenoid valves manufactured in Brass, Stainless steel, Iron and steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN32 Flange solenoid valves

Flanged DN40 11/2 inch solenoid valves manufactured in Brass, Stainless steel, Iron and steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN40 Flange solenoid valves

Flanged DN50 2 inch solenoid valves manufactured in Brass, Stainless steel, Ductile + Cast Iron and Steel, 2/2 way normally closed + open to suit air, water, fuel, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN50 Flange solenoid valves

Flanged DN65 21/2 inch solenoid valves manufactured in Stainless steel, Bronze, and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, vacuum fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN65 Flange solenoid valves

Flanged DN80 3 inch solenoid valves manufactured in Stainless steel, Bronze, Ductile Iron and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN80 Flange solenoid valves

Flanged DN100 4 inch solenoid valves manufactured in Stainless steel, Bronze, Ductile Iron and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN100 Flange Solenoid Valves

Flanged DN125 5 inch solenoid valves manufactured in Stainless steel, Ductile Iron and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN125 Flange solenoid valves

Flanged DN150 6 inch solenoid valves manufactured in Stainless steel, Ductile Iron, and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN150 Flange solenoid valves

Flanged DN200 8 inch solenoid valves manufactured in Stainless steel, Ductile Iron, and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN200 Flange solenoid valves

Flanged DN250 10 inch solenoid valves manufactured in Stainless steel, Ductile Iron, and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN250 Flange solenoid valves

Flanged DN300 12 inch solenoid valves manufactured in Stainless steel, Ductile Iron, and Aluminium, 2/2 way normally closed + open to suit air, water, fuel, natural gas, biogas, steam, fluids and gases. IP65 or ATEX protection available from solenoid valve world.

DN300 Flange solenoid valves

Filters

Price

Valve / Product Type

Air Actuated Valve0

air actuated valves that utilise a compressed air supply to operate.

Angle Seat Valve0

Angle seat piston valves, air actuated globe valves.

Motor Actuated 0

Proportional Modulating0

Flow regulating valves with manual or electric modulating 4-20mA control.

Safety Shut Off0

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Solenoid Valve0

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

3/8 Flange DN100

1/2 inch Flange DN150

3/4 Flange DN200

1 inch Flange DN250

11/4 inch Flange DN320

11/2 inch Flange DN400

2 inch Flange DN500

21/2 inch Flange DN65 0

3 inch Flange DN80 0

4 inch Flange DN100 0

5 inch Flange DN125 0

6 inch Flange DN150 0

8 inch Flange DN200 0

10 inch Flange DN2500

12 inch Flange DN300 0

14 inch Flange DN350 0

16 inch Flange DN400 0

18 inch Flange DN450 0

20 inch Flange DN500 0

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Fluid (Stong Acid/Alkali)0

Fluid Thick 51>500cSt0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Gases (Strong Acid/Alkali)0

Natural Gas0

Oils + Fuels 50cSt Max0

Steam0

Vacuum (Low)0

Vacuum (Medium)0

Water0

Water (RO/Pure/Demin)0

Body Material

Aluminium0

Brass0

Bronze0

Cast Iron0

Ductile Iron0

Steel0

Stainless Steel0

Function

2/2 Normally Closed0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Normally Open0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Double Acting0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - power or air one side to move - power or air opposite side to return.

Proportional / Modulating0

Valve opens proportionally according to signal input, either 4-20mA, 0-10v or 0-5 volt. Example 4mA valve closed, 8mA 25% open, 12mA 50% open, 18mA 75% open and 20mA fully open.

Pressure

0.02 Bar (20 mBar)0

0.02 Bar = 20 millibars = 0.29psi = 2 Kpa

0.1 Bar (100 mBar)0

0.1 Bar = 100 millibars = 1.47 psi = 1kPa

0.2 Bar (200 mBar)0

0.2 Bar = 200 millibars = 2.94 psi = 20kPa

0.3 Bar (300 mBar)0

0.3 Bar = 300 millibars = 4.41 psi = 30 kPa

0.4 Bar (400 mBar)0

0.4 Bar = 400 millibars = 4.41 psi = 40 kPa

0.5 Bar (500 mBar)0

0.5 Bar = 500 millibars = 7.36 psi = 50 kPa

0.6 Bar (600 mbar)0

0.6 Bar = 600 millibars = 8.83 psi = 60 kPa

0.7 Bar (700 mBar)0

0.7 Bar = 700 millibars = 10.3 psi = 70 kPa

0.8 Bar (800 mBar)0

0.8 Bar = 800 millibars = 11.77 psi = 80 kPa

1 Bar0

1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa

1.2 Bar0

1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa

1.3 Bar0

1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa

1.4 Bar0

1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa

1.5 Bar0

1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa

1.6 Bar0

1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa

2 Bar0

2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa

2.5 Bar0

2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

12 Bar0

12 Bar = 176.52 psi = 1.2 MPa

13 Bar0

13 Bar = 191.23 psi = 1.3 MPa

14 Bar0

14 Bar = 205.94 psi = 1.4 MPa

15 Bar0

15 Bar = 220.65 psi = 1.5 MPa

16 Bar0

16 Bar = 235.36 psi = 1.6 MPa

17 Bar0

17 Bar = 250.07 psi = 1.7 MPa

18 Bar0

18 Bar = 264.78 psi = 1.8 MPa

20 Bar0

20 Bar = 294.2 psi = 2 MPa

25 Bar0

25 Bar = 367.8 psi = 2.5 MPa

Seals

ECO0

ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C

EPDM0

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

HNBR0

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

Hypalon0

Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Neoprene0

Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.

PTFE (Teflon)0

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Silicone0

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

VST0

VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C

Voltage

12vDC0

12 volts Direct Current

12vAC0

12 volts 50/60Hz Alternating Current

24vDC0

24 volts Direct Current

24vAC0

24 volts 50/60Hz Alternating Current

36vAC0

36 volts 50/60Hz alternating current

48vAC0

48 volts 50/60Hz alternating current

48vDC0

48 volts Direct Current

110vAC0

110 volts 50/60Hz Alternating Current

110vDC0

110 volts Direct Current

125vDC0

125 volts Direct Current

230VAC0

230 volts 50/60Hz Alternating Current

200vDC0

200 volts Direct Current

380vAC0

380 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

ATEX Zone II GD0

hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.

ATEX ExnA0

certifies equipment for use in potentially explosive atmospheres, indicating it is designed to prevent ignition sources, minimizing risk.

ATEX Exm0

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd0

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

IP540

Dust protected and protected against splashing water

IP650

Dust tight and protected against water jets

IP660

Dust protected and protected against powerful water jets.

IP670

Dust protected and protected against immersion in water

IP680

Dust protected and protected against the effects of continuous immersion in water.

CSA0

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

EAC0

EAC (Eurasian Conformity) approval certifies products' compliance with technical regulations for the Eurasian Economic Union market, ensuring safety and quality standards are met

EN1610

EN161 approval is a European standard for gas safety shut-off valves, ensuring they meet specified safety and performance criteria.

FM0

FM Approval is a certification by FM Global for products meeting rigorous safety and performance standards, ensuring reliability in commercial and industrial settings.

SIL30

SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.

UL0

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

Orifice

11mm0

Valve orifice or sealing face with diameter 11mm

13mm0

Valve orifice or sealing face with diameter 13mm

15mm0

Valve orifice or sealing face with diameter 15mm

17mm0

Valve orifice or sealing face with diameter 17mm

20mm0

Valve orifice or sealing face with diameter 20mm

22mm0

Valve orifice or sealing face with diameter 22mm

24mm0

Valve orifice or sealing face with diameter 24mm

25mm0

Valve orifice or sealing face with diameter 25mm

30mm0

Valve orifice or sealing face with diameter 30mm

32mm0

Valve orifice or sealing face with diameter 32mm

35mm0

Valve orifice or sealing face with diameter 35mm

38mm0

Valve orifice or sealing face with diameter 38mm

40mm0

Valve orifice or sealing face with diameter 40mm

45mm0

Valve orifice or sealing face with diameter 45mm

50mm0

Valve orifice or sealing face with diameter 50mm

59mm0

65mm0

Valve orifice or sealing face with diameter 65mm

76mm0

80mm0

Valve orifice or sealing face with diameter 80mm

95mm0

125mm0

Valve orifice or sealing face with diameter 125mm

150mm0

Valve orifice or sealing face with diameter 150mm

200mm0

Valve orifice or sealing face with diameter 200mm

250mm0

Valve orifice or sealing face with diameter 250mm

300mm0

Valve orifice or sealing face with diameter 300mm

350mm0

Valve orifice or sealing face with diameter 350mm

400mm0

Valve orifice or sealing face with diameter 400mm

450mm0

Valve orifice or sealing face with diameter 450mm

500mm0

Valve orifice or sealing face with diameter 500mm

Operation

Assisted Lift0

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting0

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted0

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Anti Water Hammer0

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow0

Can control flow in both directions

Degreased0

Oil and grease removed typically for oxygen or paint spray use.

Flow Control0

Flow regulation to control the amount of flow.

Manual Override0

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Manual Reset0

A facility that prevents a valve from returning to its previous position without manual intervention by a lever or button. Typically used for safety systems.

Position Feedback Closed0

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed0

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position proximity switch - Open0

The valve is equipped with an additional volt free electrical switch that is triggered as the valve reaches the open position.

Position indication Visual 0

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Shading Ring - Silver0

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without0

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Only Show Items In Stock

Hide spare parts

Showing 1 - 20 of 78 total products

DN65 PN16 Flange Gas solenoid valve EN161 200mBar N/Closed £936.98 £351.54 inc VAT

12 IN STOCK

DN80 PN16 Flange Gas solenoid valve EN161 200mBar N/Closed £1,057.42 £398.16 inc VAT

5 IN STOCK

DN100 PN16 Flange Gas solenoid valve EN161 200mBar N/Closed £1,904.62 £770.28 inc VAT

1 IN STOCK

DN50-500 Ductile iron solenoid valve 0.7-10 Bar 2/2 N/Closed £1,009.52 £605.71 inc VAT

46 IN STOCK

DN125 PN16 Flanged 5 Gas safety shut off valve EN161 500mBar £5,531.16 £1,786.68 inc VAT

2 IN STOCK

DN150 PN16 Flanged 6 Gas safety shut off valve EN161 500mBar £5,892.07 £1,903.44 inc VAT

2 IN STOCK

DN100 PN16 Flanged Gas safety shut off valve EN161 1300mBar £3,703.67 £1,198.68 inc VAT

2 IN STOCK

DN200 PN16 Gas solenoid valve EN161 600mBar Manual Reset £7,965.90 £3,270.48 inc VAT

3 IN STOCK

DN80 PN16 Flange 3" Gas safety shut off valve EN161 1600mBar £3,021.94 £1,064.28 inc VAT

DN15 Stainless steel solenoid valve 0.5-15 Bar 2/2 N/Closed £404.10 £296.34 inc VAT

DN125 PN16 Flange Gas solenoid valve EN161 200mBar N/Closed £4,422.23 £1,544.76 inc VAT

3 IN STOCK

DN25 Flange brass solenoid valve 0.5-15 Bar 2/2 way N/Open £515.00 £377.66 inc VAT

1 IN STOCK

DN100 PN16 Gas solenoid valve EN161 600mBar Manual Reset £2,345.94 £963.15 inc VAT

3 IN STOCK

DN250 PN16 Flanged Gas safety shut off valve EN161 1300mBar £17,995.12 £5,376.80 inc VAT

2 IN STOCK

DN10 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed £404.10 £296.34 inc VAT

DN65 Bronze solenoid valve 0.5-10 Bar 2/2 N/Closed+ Open £2,602.44 £1,853.28 inc VAT

DN20 Flange brass solenoid valve 0.5-15 Bar 2/2 way N/Open £515.00 £377.66 inc VAT

DN32 Flange Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed £881.80 £646.66 inc VAT

DN150 PN16 Gas solenoid valve EN161 600mBar Manual Reset £4,691.89 £1,926.30 inc VAT

3 IN STOCK

DN50-500 316 Stainless solenoid valve 0.7-10 Bar 2/2 N/Open £2,650.08 £1,590.05 inc VAT

1
2
3
4

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
sales@solenoid-valves.com

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

ATEX Valves Search by Brand Breathing Air Filters High Pressure Valves Clearance Items WRAS Valves New Products Information Chemical Compatibility Guide

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2025 Connexion Developments Ltd, All rights reserved.