Key Features
- Pre-Wired DIN Form A Connector
- 5 Metre Cable Included
- 3 Core 0.75mm² PVC Cable
- 0–250V AC/DC
- 10A Maximum Current
- No Internal Circuit
- DIN Form A 18mm Pins
- EN 175301-803 / ISO 4400
- Moulded TPU Construction
- IP67 Protection
- 2 + 2 PE Terminals
- Stainless Steel Fixing Screw
Datasheets
Description
Pre-Wired DIN Form A Connector 5m Cable – IP67
Nass Magnet moulded pre-wired DIN Form A electrical connector supplied with a factory-fitted 5 metre, 3-core 0.75mm² PVC cable for fast and reliable connection to compatible solenoid valves and coils.
Manufactured to EN 175301-803 / ISO 4400 Form A with standard 18mm contact spacing, the connector provides a robust ready-wired alternative to conventional field-assembled DIN connectors.
The moulded TPU construction and integral cable provide IP67 protection when correctly installed onto a compatible counterpart, making this version particularly suitable for industrial installations requiring a higher level of environmental protection.
With no internal electronic circuit, it can be used for compatible AC or DC applications from 0–250V, with a maximum operating current of 10A.
Electrical Specification
Manufacturer: Nass Magnet
Connector type: Moulded DIN Form A
Standard: EN 175301-803 / ISO 4400
Contact distance: 18mm
Poles: 2 + 2 PE
Protective earth position: 6/12h
Voltage range: 0–250V AC/DC
Maximum operating current: 10A
Circuit: None
LED: None
Protection element: None
Protection: IP67
Pre-Wired 5 Metre Cable
Cable length: 5 metres
Cable jacket: Black PVC
Cable cores: 3
Conductor size: 3 × 0.75mm²
Approximate cable OD: 6.7mm
Stripped length: 30mm
Core colours:
✓ Brown
✓ Blue
✓ Green / Yellow
The cable ends are also supplied with wire-end sleeves already fitted.
Moulded IP67 Construction
Unlike a conventional DIN connector assembled from a housing, gasket and cable gland, this version uses a moulded TPU sheathing and moulded TPU gasket.
Housing colour: Anthracite translucent
Moulded sheathing: TPU
Gasket: Moulded TPU
Protection rating: IP67
The manufacturer's IP67 rating applies when the connector is properly mounted to the corresponding compatible connection.
No Internal Circuit
This connector is supplied without internal electronics.
There is no:
✓ LED indicator
✓ Bridge rectifier
✓ VDR varistor
✓ TVS suppressor
✓ PWM circuit
✓ Protection element
This makes it suitable for general-purpose AC or DC solenoid valve connections where additional electronic functions are not required.
0–250V AC/DC Operation
Operating voltage range: 0–250V AC/DC
Maximum operating current: 10A
Because there are no voltage-specific electronic components inside the connector, the same assembly can be used with numerous compatible AC and DC solenoid coil voltages.
The connected solenoid coil must always be correctly matched to the electrical supply voltage.
Contacts & Terminal Construction
Terminal block material: PA6 GF15
Contacts: CuZn, Cu/Sn coated
Contact resistance: <15mΩ
Poles: 2 + 2 PE
Protective earth position: 6/12h
Contact distance: 18mm
Stainless Steel Fixing Screw
The supplied central fixing screw is stainless steel rather than zinc-plated steel:
Material: A2-50 stainless steel
Size: M3 × 26mm
Recommended tightening torque: 0.4 ± 0.1Nm
Temperature Range
General temperature range: -25°C to +90°C
Cable temperature, fixed installation: -30°C to +80°C
Cable temperature, flexible installation: -5°C to +70°C
The overall permissible temperature depends upon the connected cable and installation conditions.
Why Choose a Moulded Pre-Wired Connector?
The factory-moulded design provides a ready-to-install alternative to conventional field-wireable DIN connectors.
Benefits include:
✓ No cable gland assembly
✓ No internal terminal wiring
✓ Factory-fitted 5m cable
✓ Pre-fitted wire-end sleeves
✓ IP67 environmental protection
✓ Consistent factory-assembled connection
✓ Reduced installation time
✓ Neat professional installation
It is particularly useful for equipment manufacturers and industrial installations where repeatable wiring and increased environmental protection are important.
Typical Applications
✓ Solenoid valves
✓ Pneumatic valves
✓ Hydraulic valves
✓ Process control valves
✓ Water control systems
✓ Industrial automation
✓ OEM machinery
✓ Packaging machinery
✓ Pumps and fluid systems
✓ Outdoor industrial equipment
✓ Washdown environments
✓ Replacement solenoid wiring
IP67 vs Standard IP65 DIN Connectors
The key reason to select this model is not simply the longer cable.
A standard field-assembled or moulded IP65 connector provides good general industrial protection, whereas this version provides IP67 when properly installed, offering protection against temporary water immersion under the conditions defined by IEC 60529.
For damp, exposed or more demanding installations, the IP67 construction therefore provides a worthwhile upgrade.
Why Choose This Nass Magnet Pre-Wired Connector?
The Nass Magnet moulded Form A connector combines a standard 18mm EN 175301-803 interface with a factory-fitted 5 metre cable and IP67 protection.
Its 0–250V AC/DC, 10A maximum rating makes it suitable for a wide range of compatible industrial solenoid valves, while the moulded construction eliminates the time required to assemble and terminate a conventional DIN connector.
For applications requiring a longer cable and improved environmental protection, it provides a particularly convenient ready-to-install solution.
Related Products & Categories
Technical Specification
Brand: Nass Magnet GmbH
Model: DIN3-5mtr
Width: 28.00 mm
Height: 31.00 mm
Depth: 28.00 mm
Weight: 0.40 kg
Voltage: 110vAC, 110vDC, 125vDC, 12vAC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 36vAC, 48vAC, 48vDC, 6vDC
Approvals:: IP65, IP66, IP67
Spares (Coils, Connectors, Seals): DIN connector Form A
DIN Connector Type: Pre-Wired:
DIN Connector Circuit: Without
Found in these Categories
Electrical Connector Form A prewired 5 mtr cable 0-250v IP67
£9.90 incl. VAT £8.25 ex. VAT
-71% Was £33.77 incl. VAT