Valve / Product Type

Safety Shut Off

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Solenoid Valve

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

1/4 thread

valves with 1/4 inch threaded ports

3/8 thread

valves with 3/8 inch threaded ports

1/2 thread

valves with 1/2 inch threaded ports

3/4 thread

valves with 3/4 inch threaded ports

1 thread

valves with 1 inch threaded ports

11/4 thread

valves with 11/4 inch threaded ports

11/2 thread

valves with 11/2 inch threaded ports

2 thread

valves with 2 inch threaded ports

Media

Air

Gases (Non Aggressive)

Gases (Slight Acid/Alakli)

Natural Gas

Body Material

Aluminium

Brass

Pressure

Seals

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Voltage

12vDC

12 volts Direct Current

12vAC

12 volts 50/60Hz Alternating Current

24vDC

24 volts Direct Current

24vAC

24 volts 50/60Hz Alternating Current

110vAC

110 volts 50/60Hz Alternating Current

110vDC

110 volts Direct Current

230VAC

230 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

IP54

Dust protected and protected against splashing water

IP65

Dust tight and protected against water jets

EAC

EAC (Eurasian Conformity) approval certifies products' compliance with technical regulations for the Eurasian Economic Union market, ensuring safety and quality standards are met

EN161

EN161 approval is a European standard for gas safety shut-off valves, ensuring they meet specified safety and performance criteria.

FM

FM Approval is a certification by FM Global for products meeting rigorous safety and performance standards, ensuring reliability in commercial and industrial settings.

SIL3

SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.

Orifice

Operation

Assisted Lift

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting

Directly controls flow without external pressure assistance operates from vacuum upwards.

Options required

Flow Control

Flow regulation to control the amount of flow.

Manual Reset

A facility that prevents a valve from returning to its previous position without manual intervention by a lever or button. Typically used for safety systems.

Position Feedback Closed

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Only Show Items In Stock

Hide spare parts

Gas Valves by BSP Size

1/4 Inch Gas Solenoid Valves

3/8 Inch Gas Solenoid Valves

1/2 Inch Gas Solenoid Valves

3/4 Inch Gas Solenoid Valves

1 Inch Gas Solenoid Valves

11/4 Inch Gas Solenoid Valves

11/2 Inch Gas Solenoid Valves

2 Inch Gas Solenoid Valves

Filters

74 IN STOCK

6 IN STOCK

81 IN STOCK

5 IN STOCK

15 IN STOCK

17 IN STOCK

37 IN STOCK

5 IN STOCK

7 IN STOCK

3 IN STOCK

4 IN STOCK

3 IN STOCK

3 IN STOCK

3 IN STOCK

3 IN STOCK

3 IN STOCK