Solenoid valve world

Solenoid Valves WRAS Natural Gas Valves Wizard Actuated Valves Pneumatics Contact Us

Home
Solenoid valves
Solenoid valves by pressure

Solenoid Valves by Pressure

Browse solenoid valves by pressure rating, from vacuum (-101 kPa) up to 600 Bar. This category allows easy selection of valves for low, medium and high pressure applications, including water, air, gas and industrial fluids. → Vacuum: -101 kPa to 0 Bar → Low pressure: 0–1 Bar → Standard pressure: 0–10 Bar → Medium pressure: 10–40 Bar → High pressure: 50–600 Bar Available in 2/2 and 3/2 way configurations, with brass, stainless steel and plastic body options. WRAS and ATEX approved valves available. ✓ Easy selection by pressure range ✓ Wide UK stock for fast delivery ✓ Suitable for general and industrial applications

Show Sub Categories

Vacuum solenoid valves designed for operation from full vacuum (-101 kPa) up to 0 Bar, ideal for systems with no positive pressure.

These valves are direct acting, allowing reliable switching without pressure differential, making them essential for vacuum and low-pressure control applications.

→ Pressure range: -101 kPa to 0 Bar (vacuum to atmospheric)
→ Operation: direct acting for zero pressure systems
→ Valve types: 2/2 way and 3/2 way
→ Body materials: brass and stainless steel
→ Media: air, gas, vacuum and light fluids

Typical applications include:

→ Vacuum pumps and suction systems
→ Packaging and pick-and-place machinery
→ Laboratory and analytical equipment
→ Medical and process vacuum systems

✓ Reliable operation at zero pressure
✓ Designed specifically for vacuum conditions
✓ Wide range available from UK stock
✓ Free UK delivery on all orders

Vacuum Solenoid Valves (-101 kPa to 0 Bar)

Low pressure solenoid valves designed for applications operating between 0 and 1 Bar, including vacuum and near-zero pressure systems.

These valves are suitable for use where minimal pressure differential is available, making them ideal for gravity-fed systems, vacuum control and sensitive low-pressure applications.

→ Pressure range: 0 to 1 Bar
→ Valve types: 2/2 way and 3/2 way
→ Operation: direct acting for zero pressure operation
→ Body materials: brass, stainless steel and plastic
→ Media: air, water, gas and light fluids

Common applications include:

→ Vacuum systems and suction lines
→ Gravity-fed water systems
→ Low pressure dosing and control
→ Laboratory and analytical equipment

✓ Designed for zero or low pressure operation
✓ Reliable switching without pressure assist
✓ Wide range available from UK stock
✓ Fast delivery with free UK shipping

0–1 Bar Solenoid Valves

10 Bar solenoid valves designed for applications requiring up to 10 Bar or more operating pressure.

Available in 2/2, 3/2 and 5/2 configurations, these valves are manufactured from brass, stainless steel, aluminium and plastic to suit a wide range of industrial and process applications.

→ Pressure range: 10 Bar and above
→ Valve types: 2/2 way, 3/2 way and 5/2 way
→ Body materials: brass, stainless steel, aluminium and engineered plastics
→ Media: air, water, gas and compatible fluids

Typical applications include:

→ Industrial automation and pneumatic systems
→ Water control and process systems
→ Compressed air installations
→ General purpose high pressure fluid control

✓ Wide range available from UK stock
✓ Options for WRAS, ATEX and specialist applications
✓ Reliable performance at higher pressures
✓ Free UK delivery on all orders

10 Bar Solenoid Valves

High pressure solenoid valves rated for operation up to 20 Bar, designed for demanding industrial and process applications.

Available in 2/2 and 3/2 configurations, these valves are manufactured from brass and stainless steel for strength, durability and long service life under elevated pressures.

→ Pressure range: up to 20 Bar
→ Valve types: 2/2 way and 3/2 way
→ Body materials: brass and stainless steel
→ Media: air, water, gas and compatible fluids

Typical applications include:

→ Industrial machinery and automation
→ High pressure water systems
→ Steam and process control
→ Compressed air and gas systems

✓ Designed for reliable high-pressure operation
✓ Durable construction for long service life
✓ Wide range available from UK stock
✓ Free UK delivery on all orders

20 Bar Solenoid Valves

High pressure solenoid valves rated up to 40 Bar, designed for demanding industrial and process applications where standard valves are not sufficient.

Available in 2/2 and 3/2 configurations, these valves are manufactured from brass and stainless steel to ensure strength, reliability and long service life under elevated pressure conditions.

→ Pressure range: up to 40 Bar
→ Valve types: 2/2 way and 3/2 way
→ Body materials: brass and stainless steel
→ Media: air, water, gas and compatible fluids

Typical applications include:

→ High pressure water and washdown systems
→ Industrial process control
→ Steam and heated systems
→ Compressed air and gas distribution

✓ Engineered for high-pressure performance
✓ Robust construction for demanding environments
✓ Wide range available from UK stock
✓ Free UK delivery on all orders

40 Bar Solenoid Valves

High pressure solenoid valves designed for demanding industrial and hydraulic applications, with pressure ratings from 50 up to 600 Bar.

These valves are engineered for reliable control of liquids, gases and hydraulic media under extreme pressure conditions, where standard solenoid valves are not suitable.

Available in 2/2 and 3/2 way configurations, with both direct acting and pilot operated designs to suit a wide range of high-pressure systems.

→ Pressure range: 50 to 600 Bar
→ Valve types: 2/2 way and 3/2 way
→ Operation: direct acting & pilot operated
→ Materials: brass and stainless steel
→ Approvals: IP65 safe area and ATEX hazardous area options

Typical applications include:

→ Hydraulic systems and high-pressure circuits
→ Industrial process control
→ Gas and fluid control at elevated pressures
→ OEM machinery and specialist equipment

✓ Designed for extreme pressure performance
✓ Robust, industrial-grade construction
✓ ATEX options available for hazardous areas
✓ UK stock with fast delivery

50–600 Bar High Pressure Solenoid Valves

Filters

Price

Valve / Product Type

Air Actuated Valve0

air actuated valves that utilise a compressed air supply to operate.

Ball Valve0

Motor and air actuated quarter turn 2+3 way ball valves

Coaxial Valve0

Manual + Mechanical Control0

Air valves that are controlled manually and mechanically

Motor Actuated Valves0

Pressure Reducing0

Pressure reducing valves (PRV) reduce and maintain stable outlet pressure

Proportional Modulating0

Flow regulating valves with manual or electric modulating 4-20mA control.

Safety Shut Off0

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Solenoid Valve0

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

M50

M60

1/8 thread0

valves with 1/8 inch threaded ports

1/4 thread0

valves with 1/4 inch threaded ports

1/4 Push Fit 0

6mm0

8mm0

3/8 thread0

valves with 3/8 inch threaded ports

3/8 Push Fit0

10mm0

1/2 thread0

valves with 1/2 inch threaded ports

1/2 inch Flange DN150

15mm0

3/4 thread0

valves with 3/4 inch threaded ports

3/4 Flange DN200

1 thread0

valves with 1 inch threaded ports

1 inch Flange DN250

11/4 thread0

valves with 11/4 inch threaded ports

11/4 inch Flange DN320

11/2 thread0

valves with 11/2 inch threaded ports

11/2 inch Flange DN400

2 thread0

valves with 2 inch threaded ports

2 inch Flange DN500

21/2 thread0

valves with 21/2 inch threaded ports

21/2 inch Flange DN65 0

3 thread0

valves with 3 inch threaded ports

3 inch Flange DN80 0

4 Inch0

4 inch Flange DN100 0

5 inch Flange DN125 0

6 inch Flange DN150 0

8 inch Flange DN200 0

10 inch Flange DN2500

12 inch Flange DN300 0

14 inch Flange DN350 0

16 inch Flange DN400 0

18 inch Flange DN450 0

20 inch Flange DN500 0

Namur mount0

valves with Namur interface mounting

Sub Base Mount0

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Fluid (Stong Acid/Alkali)0

Fluid Thick 51>500cSt0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Gases (Strong Acid/Alkali)0

Natural Gas0

Oils + Fuels 50cSt Max0

Steam0

Vacuum (Low)0

Vacuum (Medium)0

Vacuum (High)0

Water0

Water (RO/Pure/Demin)0

Body Material

Aluminium0

Brass0

Bronze0

Cast Iron0

Delrin (POM)0

Ductile Iron0

Nylon0

PPA0

Steel0

Stainless Steel0

Function

2/2 Failsafe Closed0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Failsafe Open0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Latching0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - short power pulse valve stays open - reverse power pulse valve stays closed

2/2 Double Acting0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - power or air one side to move - power or air opposite side to return.

3/2 Normally Closed0

3 ports with 2 positions. Power off inlet closed, outlet open to exhaust - power on inlet open to outlet with exhaust closed.

3/2 Normally Open0

3 ports 2 positions. Inlet open to outlet with exhaust closed - power on inlet closed with outlet open to exhaust.

3/2 Universal0

3 ports, 2 positions flow can be in any direction. Can be piped as 3/2 normally closed flow into inlet, 3/2 normally open flow into exhaust, 3/2 diverting flow into outlet.

3 way T Port0

3 way L Port0

5/2 Single Acting0

5 ports 2 positions (1 inlet, 2 outlets, 2 exhaust ports). Power to coil Cylinder fully extends - Power off cylinder fully retracts (or visa versa)

5/2 Double Acting0

Power to left coil Cylinder fully extends, power to right coil cylinder fully retracts, power off cylinder stays put fully extended or retracted.

5/3 Way0

Power to left coil cylinder extends, power to right coil cylinder retracts, power off cylinder stays put even in a mid position.

Proportional / Modulating0

Valve opens proportionally according to signal input, either 4-20mA, 0-10v or 0-5 volt. Example 4mA valve closed, 8mA 25% open, 12mA 50% open, 18mA 75% open and 20mA fully open.

Pressure

Vacuum0

Vacuum products including valves, filters, regulators for vacuum and high vacuum systems down to -101Kpa.

0.02 Bar (20 mBar)0

0.02 Bar = 20 millibars = 0.29psi = 2 Kpa

0.1 Bar (100 mBar)0

0.1 Bar = 100 millibars = 1.47 psi = 1kPa

0.2 Bar (200 mBar)0

0.2 Bar = 200 millibars = 2.94 psi = 20kPa

0.3 Bar (300 mBar)0

0.3 Bar = 300 millibars = 4.41 psi = 30 kPa

0.4 Bar (400 mBar)0

0.4 Bar = 400 millibars = 4.41 psi = 40 kPa

0.5 Bar (500 mBar)0

0.5 Bar = 500 millibars = 7.36 psi = 50 kPa

0.6 Bar (600 mbar)0

0.6 Bar = 600 millibars = 8.83 psi = 60 kPa

0.7 Bar (700 mBar)0

0.7 Bar = 700 millibars = 10.3 psi = 70 kPa

0.8 Bar (800 mBar)0

0.8 Bar = 800 millibars = 11.77 psi = 80 kPa

1 Bar0

1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa

1.2 Bar0

1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa

1.3 Bar0

1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa

1.4 Bar0

1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa

1.5 Bar0

1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa

1.6 Bar0

1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa

2 Bar0

2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa

2.5 Bar0

2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

12 Bar0

12 Bar = 176.52 psi = 1.2 MPa

13 Bar0

13 Bar = 191.23 psi = 1.3 MPa

14 Bar0

14 Bar = 205.94 psi = 1.4 MPa

15 Bar0

15 Bar = 220.65 psi = 1.5 MPa

16 Bar0

16 Bar = 235.36 psi = 1.6 MPa

17 Bar0

17 Bar = 250.07 psi = 1.7 MPa

18 Bar0

18 Bar = 264.78 psi = 1.8 MPa

20 Bar0

20 Bar = 294.2 psi = 2 MPa

25 Bar0

25 Bar = 367.8 psi = 2.5 MPa

30 Bar0

30 Bar = 441.3 psi = 3 MPa

35 Bar0

35 Bar = 514.9 psi = 3.5 MPa

40 Bar0

40 Bar = 588.4 psi = 4 MPa

50 Bar0

50 Bar = 735.5 psi = 5 MPa

60 Bar0

60 Bar = 882.6 psi = 6 MPa

64 Bar0

64 Bar = 941.4 psi = 6.4 MPa

70 Bar0

70 Bar = 1029.7 psi = 7 MPa

80 Bar0

80 Bar = 1176.8 psi = 8 MPa

90 Bar0

90 Bar = 1323.9 psi = 9 MPa

100 Bar0

100 Bar = 1471 psi = 10 MPa

120 Bar0

120 Bar = 1765.2 psi = 12 MPa

130 Bar0

130 Bar = 1912.3 psi = 13 MPa

135 Bar0

140 Bar0

140 Bar = 2059.4 psi = 14 MPa

150 Bar0

150 Bar = 2206.5 psi = 15 MPa

160 Bar0

160 Bar = 2353.6 psi = 16 MPa

200 Bar0

200 Bar = 2942 psi = 20 MPa

225 Bar0

225 Bar = 3309.75 psi = 22.5 MPa

270 Bar0

270 Bar = 3971.7 psi = 27 MPa

300 Bar0

300 Bar = 4413 psi = 30 MPa

350 Bar0

350 Bar = 5148.5 psi = 35 MPa

400 Bar0

400 Bar = 5884 psi = 40 MPa

500 Bar0

500 Bar = 7355 psi = 50 MPa

600 Bar0

600 Bar = 8826 psi = 60 MPa

Seals

ECO0

ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C

EPDM0

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

FFKM (Kalrez)0

FF-KM Perfluoroelastomer - known as Kalrez, Chemraz or Perlast. Good most Solvents, Chemicals + excellent resistance to almost every thing, far surpassing FKM. -40°C to +250°C.

HNBR0

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

Hypalon0

Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Neoprene0

Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.

Peek0

PEEK (Polyetheretherketone) excellent chemical resistance, high temperature resistance, and low friction properties. -50°C to +250°C.

Polyurethane0

Polyurethane excellent durability, flexibility, and resistance to abrasion and chemicals, commonly used in various sealing applications, such as hydraulic systems and pneumatic cylinders. -40°C to 100°C

PTFE (Teflon)0

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Ruby0

Synthetic ruby or synthetic corundum or synthetic sapphire. Exceptional hardness, wear resistance, and chemical inertness chemically inert and resistant to most acids, alkalis, and solvents. -200°C to 2000°C.

Silicone0

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

Voltalef0

Voltalef known as PCTFE excellent chemical resistance, radiation resistance, and flammability characteristics, resistant to cold flow and it has the lowest coefficient of thermal expansion of any unfilled fluoropolymer. -240°C to +193.3°C.

VST0

VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C

Voltage

3vDC0

3 volts Direct Current for 2x 1.5v AA batteries

6vDC0

6 volts Direct Current

12vDC0

12 volts Direct Current

12vAC0

12 volts 50/60Hz Alternating Current

24vDC0

24 volts Direct Current

24vAC0

24 volts 50/60Hz Alternating Current

36vAC0

36 volts 50/60Hz alternating current

48vAC0

48 volts 50/60Hz alternating current

48vDC0

48 volts Direct Current

110vAC0

110 volts 50/60Hz Alternating Current

110vDC0

110 volts Direct Current

125vDC0

125 volts Direct Current

230VAC0

230 volts 50/60Hz Alternating Current

200vDC0

200 volts Direct Current

380vAC0

380 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

ATEX Exm0

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd0

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

ATEX Exia0

ATEX protection by intrinsic safety, II 2 G Ex ia IIB/IIC T4 or T6.

IPX0 (Faston Tag)0

No protection against foreign object or water ingress.

IP540

Dust protected and protected against splashing water

IP650

Dust tight and protected against water jets

IP660

Dust protected and protected against powerful water jets.

IP670

Dust protected and protected against immersion in water

IP680

Dust protected and protected against the effects of continuous immersion in water.

CSA0

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

CUTR0

CUTR approval stands for "Center for Urban Transportation Research" approval, indicating compliance with transportation standards and regulations for projects or products.

EAC0

EAC (Eurasian Conformity) approval certifies products' compliance with technical regulations for the Eurasian Economic Union market, ensuring safety and quality standards are met

EN1610

EN161 approval is a European standard for gas safety shut-off valves, ensuring they meet specified safety and performance criteria.

FM0

FM Approval is a certification by FM Global for products meeting rigorous safety and performance standards, ensuring reliability in commercial and industrial settings.

SIL30

SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.

UL0

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

WRAS0

WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.

Orifice

0.4mm0

Valve orifice or sealing face with diameter 0.4mm

0.5mm0

Valve orifice or sealing face with diameter 0.5mm

0.6mm0

Valve orifice or sealing face with diameter 0.6mm

0.7mm0

Valve orifice or sealing face with diameter 0.7mm

0.8mm0

Valve orifice or sealing face with diameter 0.8mm

0.9mm0

Valve orifice or sealing face with diameter 0.9mm

1.0mm0

Valve orifice or sealing face with diameter 1mm

1.2mm0

Valve orifice or sealing face with diameter 1.2mm

1.3mm0

Valve orifice or sealing face with diameter 1.3mm

1.4mm0

Valve orifice or sealing face with diameter 1.4mm

1.5mm0

Valve orifice or sealing face with diameter 1.5mm

1.6mm0

Valve orifice or sealing face with diameter 1.6mm

1.8mm0

Valve orifice or sealing face with diameter 1.8mm

2.0mm0

Valve orifice or sealing face with diameter 2mm

2.2mm0

Valve orifice or sealing face with diameter 2.2mm

2.3mm0

Valve orifice or sealing face with diameter 2.3mm

2.4mm0

Valve orifice or sealing face with diameter 2.4mm

2.5mm0

Valve orifice or sealing face with diameter 2.5mm

3.0mm0

Valve orifice or sealing face with diameter 3mm

3.5mm0

Valve orifice or sealing face with diameter 3.5mm

4.0mm0

Valve orifice or sealing face with diameter 4mm

4.5mm0

Valve orifice or sealing face with diameter 4.5mm

5.0mm0

Valve orifice or sealing face with diameter 5

5.5mm0

Valve orifice or sealing face with diameter 5.5mm

6.0mm0

Valve orifice or sealing face with diameter 6mm

6.5mm0

Valve orifice or sealing face with diameter 6.5mm

7mm0

Valve orifice or sealing face with diameter 7mm

7.5mm0

Valve orifice or sealing face with diameter 7.5

8.0mm0

Valve orifice or sealing face with diameter 8mm

9.0mm0

Valve orifice or sealing face with diameter 9mm

9.5mm0

Valve orifice or sealing face with diameter 9.5mm

10mm0

Valve orifice or sealing face with diameter 10mm

11mm0

Valve orifice or sealing face with diameter 11mm

12mm0

Valve orifice or sealing face with diameter 12mm

13mm0

Valve orifice or sealing face with diameter 13mm

14mm0

Valve orifice or sealing face with diameter 14mm

15mm0

Valve orifice or sealing face with diameter 15mm

17mm0

Valve orifice or sealing face with diameter 17mm

18mm0

Valve orifice or sealing face with diameter 18mm

20mm0

Valve orifice or sealing face with diameter 20mm

22mm0

Valve orifice or sealing face with diameter 22mm

23mm0

Valve orifice or sealing face with diameter 23mm

24mm0

Valve orifice or sealing face with diameter 24mm

25mm0

Valve orifice or sealing face with diameter 25mm

28mm0

Valve orifice or sealing face with diameter 28mm

30mm0

Valve orifice or sealing face with diameter 30mm

32mm0

Valve orifice or sealing face with diameter 32mm

35mm0

Valve orifice or sealing face with diameter 35mm

38mm0

Valve orifice or sealing face with diameter 38mm

40mm0

Valve orifice or sealing face with diameter 40mm

45mm0

Valve orifice or sealing face with diameter 45mm

50mm0

Valve orifice or sealing face with diameter 50mm

65mm0

Valve orifice or sealing face with diameter 65mm

80mm0

Valve orifice or sealing face with diameter 80mm

125mm0

Valve orifice or sealing face with diameter 125mm

150mm0

Valve orifice or sealing face with diameter 150mm

200mm0

Valve orifice or sealing face with diameter 200mm

250mm0

Valve orifice or sealing face with diameter 250mm

300mm0

Valve orifice or sealing face with diameter 300mm

350mm0

Valve orifice or sealing face with diameter 350mm

400mm0

Valve orifice or sealing face with diameter 400mm

450mm0

Valve orifice or sealing face with diameter 450mm

500mm0

Valve orifice or sealing face with diameter 500mm

Operation

Assisted Lift0

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting0

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted0

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Anti Water Hammer0

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow0

Can control flow in both directions

Degreased0

Oil and grease removed typically for oxygen or paint spray use.

Flow Control0

Flow regulation to control the amount of flow.

Manifold0

A group of multiple valves together on one manifold, simple layout streamline control and space saving.

Manual Control0

Valves that require manual input to operate such as lever, button or switch

Manual Override0

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Manual Reset0

A facility that prevents a valve from returning to its previous position without manual intervention by a lever or button. Typically used for safety systems.

Mounting Bracket0

Valve has the facility to be supplied with a bracket for mounting and securing.

Mounting Holes0

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Outlet - right angle0

The outlet port is at right angles to inlet port, ideal for space efficiency.

Outlet - Hose tail0

Outlet port and a Hose tail or barb to connect directly into flexible tube

Outlet - Double0

Valve has single inlet but twin or two outlet ports.

Outlet - Triple0

Valve has single inlet but triple or three outlet ports.

Position Feedback Closed0

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed0

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position indication Visual 0

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Shading Ring - Silver0

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without0

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Y Pattern0

A Y-pattern valve is a valve with a Y-shaped body design, typically used for high-pressure applications to reduce pressure drop and turbulence, often found in steam systems.

Only Show Items In Stock

Hide spare parts

Showing 1 - 20 of 504 total products

1/2″ WRAS Latching Plastic Water Solenoid Valve 0.2–10 Bar £56.44 £34.03 inc VAT

351 IN STOCK

15mm Plastic Water Solenoid Valve 0.2-10 Bar N/Closed 1175BC £35.46 £24.14 inc VAT

1087 IN STOCK

1/2 Plastic Water Solenoid Valve 0.2-10 Bar N/Closed 5115BC £30.06 £15.75 inc VAT

365 IN STOCK

1/2″ WRAS Water Solenoid Valve 0-10 Bar Normally Closed £107.98 £70.19 inc VAT

547 IN STOCK

3/4 Plastic Water Solenoid Valve 0.2-10 Bar N/Closed 6115BC £30.06 £15.73 inc VAT

33 IN STOCK

3/4 Plastic Water Solenoid Valve 0.2-10 Bar Single Outlet £17.51 £9.41 inc VAT

232 IN STOCK

3/4″ WRAS Water Solenoid Valve 0-10 Bar Normally Closed £133.48 £86.76 inc VAT

113 IN STOCK

1/2" Brass Solenoid Valve 0.5-15 Bar 2/2 Way Normally Closed £88.96 £53.38 inc VAT

964 IN STOCK

1/4" Brass Solenoid Valve 0-8.5 Bar 2/2 Way Normally Closed £41.50 £30.43 inc VAT

1168 IN STOCK

1/4 BSP 5/2 Pneumatic Solenoid Valve Single Sol 22mm Body £40.40 £26.40 inc VAT

160 IN STOCK

15mm Plastic Water Solenoid Valve 0.2-10 Bar Latching 1175BB £59.08 £38.24 inc VAT

1091 IN STOCK

ASCO X210525720102E7 15mm WRAS Latching Solenoid Valve 6V DC £182.76 £159.50 inc VAT

15 IN STOCK

1″ WRAS Brass Water Solenoid Valve 0-10 Bar Normally Closed £166.62 £108.30 inc VAT

476 IN STOCK

1/8" Brass Solenoid Valve 0-8.5 Bar 2/2 Way Normally Closed £41.50 £30.43 inc VAT

953 IN STOCK

3/8 Plastic Water Solenoid Valve 0.2-10 Bar N/Closed 1196BC £35.46 £20.56 inc VAT

3/8 Plastic Water Solenoid Valve 0.2-10 Bar N/Closed 4115BC £30.06 £15.65 inc VAT

279 IN STOCK

1/8→1/4"BSP 3/2 Pneumatic Solenoid Valve Single 18/22mm Body £38.90 £25.69 inc VAT

76 IN STOCK

NAMUR 3/2 5/2 Air Solenoid Valve 1.5–10 Bar Single Acting £70.50 £35.26 inc VAT

197 IN STOCK

1/4" Plastic Water Solenoid Valve 0–8 Bar Normally Closed £21.47 £12.78 inc VAT

586 IN STOCK

3/8" Brass Solenoid Valve 0.1-16 Bar 2/2 way Normally Closed £52.82 £42.82 inc VAT

142 IN STOCK

1
2
3
4
...
25
Last

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
[email protected]

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

ATEX Valves Search by Brand Breathing Air Filters High Pressure Valves Clearance Items WRAS Valves New Products Information Chemical Compatibility Guide

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2026 Connexion Developments Ltd, All rights reserved.