Description
1 Inch Motorised Stainless Steel Ball Valve Mini Series – ABVM08SV
The ABVM08SV® is a compact 1 inch motorised stainless steel ball valve designed for reliable automatic control of oils, fuels, gases, compressed air and compatible industrial fluids. Combining fast operation, extremely low power consumption and configurable Failsafe Return or Power Open/Close operation, it provides an ideal solution where space, reliability and long service life are essential.
Manufactured from 304 stainless steel with a PTFE and FKM (Viton®) sealing system, the valve offers excellent chemical resistance together with reliable bubble-tight shut-off. The compact IP67 actuator is continuously rated for 100% duty operation, making it suitable for demanding indoor and outdoor industrial applications.
Key Features
✓ 2/2 way motor actuated stainless steel ball valve
✓ Compact 1" BSP full port design
✓ 304 stainless steel body and ball
✓ PTFE + FKM (Viton®) sealing system
✓ Pressure range 0–10 Bar
✓ Fast 5 second operation
✓ Failsafe Return or Power Open/Close
✓ Multi-voltage 9–24V AC/DC or 110–240V AC
✓ Extremely low power consumption
✓ IP67 weather resistant actuator
✓ Continuous 100% duty rated
✓ Visual valve position indication
Valve Specifications
Valve type: 2/2 way motor actuated ball valve
Port size: 1" BSP
Optional thread: NPT
Orifice: 25 mm
Pressure range: 0–10 Bar
Media:
Oils
Fuels
Compressed air
Industrial gases
Fluids compatible with 304 stainless steel, PTFE and FKM
Maximum media viscosity: 500 cSt
Media temperature: -15°C to +100°C
Ambient temperature: -15°C to +50°C
Mounting: Any position (except upside down)
Valve body: 304 stainless steel
Ball: 304 stainless steel
Seats: PTFE + FKM floating seats
Stem seals: Twin FKM
Static body test pressure: 35 Bar
Operating time: Approximately 5 seconds
Service life: 100,000 operations
Actuator Specifications
Protection: IP67
Torque: 3 Nm
Duty rating: Continuous (100%)
Operating time: Approximately 5 seconds
Power Consumption
Moving:
9–24V AC/DC — 5 Watts
110–240V AC — 5 Watts
Holding:
9–24V AC/DC — 0.22 Watts
110–240V AC — 0.6 Watts
Electrical connection:
9–24V AC/DC — 0.5 metre flying lead
110–240V AC — 3 metre flying lead
The actuator incorporates durable metal gears within an ABS engineering polymer housing and is factory tested through 200 open/close cycles before dispatch.
Control Options
Failsafe Closed
Power ON opens the valve.
Power OFF automatically returns the valve to the closed position using the actuator's internal reserve power system.
Failsafe Open
Power ON closes the valve.
Power OFF automatically returns the valve to the open position using stored reserve power.
Power Open / Power Close
Simple electrically controlled operation using two power wires and one control wire.
Ideal for PLC, BMS and industrial automation systems where automatic return is not required.
Voltage Options
9–24V AC/DC
110–240V AC 50/60Hz
Optional Features
Manual Override
Lift and turn the manual override control to operate the valve manually.
Push down to re-engage the actuator.
Available on 9–24V models only.
ABVM Weather Cover
Provides additional protection against prolonged exposure to rain, UV and harsh outdoor environments.
E2 Position Feedback Switches
Volt-free fully OPEN and fully CLOSED confirmation switches.
Rating: 0–36V DC 0.4 Amp maximum
Other Options
✓ 316 stainless steel valve body
✓ 3-piece ball valves
✓ 3-way ball valves
✓ Alternative voltages
✓ Extended cable lengths
Performance
The ABVM actuator is engineered for exceptionally low energy consumption. Once the valve reaches its fully open or fully closed position, power to the motor is automatically removed, significantly reducing heat generation and extending actuator life.
Failsafe models utilise high-capacity reserve capacitors to automatically return the valve to their start position following power failure. Approximately 30 seconds of applied power is required to fully recharge the reserve capacitors before the next failsafe operation.
Typical Applications
Industrial automation
Chemical dosing
Fuel systems
Oil distribution
Lubrication systems
Compressed air systems
Industrial gas control
Laboratory equipment
OEM machinery
Cooling systems
Instrumentation
Packaging machinery
General process control
Chemical transfer systems
Why Choose the ABVM08SV?
The ABVM08SV Mini Series has been developed for applications requiring reliable automatic valve control where higher flow capacity and chemical resistance are essential. Its 25 mm bore provides the highest flow capacity within the compact Mini Series while maintaining the same low power consumption, dependable actuator performance and space-saving design.
Manufactured from 304 stainless steel with PTFE + FKM (Viton®) sealing, the ABVM08SV is ideally suited to industrial automation, fuel handling, compressed air systems, chemical processing and demanding process control applications. The IP67 actuator, configurable Failsafe Return or Power Open/Close operation and energy-efficient design deliver dependable long-term performance in challenging industrial environments.
Related Products
1" Stainless Steel Solenoid Valves
