Key Features
✓ Di-Hen Mit-UNI-D-CNS XL coil
✓ Round replacement solenoid coil
✓ 20.8mm coil bore
✓ 10mm mounting plate hole
✓ Overall height 53.1mm
✓ Overall diameter 63.2mm
✓ Internal body diameter 60.7mm
✓ Metal-covered coil construction
✓ 24V DC voltage option
✓ 110V AC 50/60Hz option
✓ 230V AC 50/60Hz option
✓ Voltage-dependent power rating
✓ Class H coil insulation
✓ IP54 ingress protection
✓ Flying-lead electrical connection
✓ General duty up to 100%
✓ Steam duty restrictions apply
Datasheets
Description
20.8mm Bore XL Solenoid Coil – 24V DC / 110V AC / 230V AC
The Di-Hen Mit-UNI-D-CNS XL Series is a round replacement solenoid valve coil designed for compatible industrial solenoid valve assemblies requiring a 20.8mm coil bore and compact cylindrical construction.
Featuring a robust metal-covered coil body, Class H insulation and flying-lead electrical connections, this XL Series solenoid coil is available in 24V DC, 110V AC and 230V AC configurations for industrial fluid and steam valve applications.
With an approximate overall diameter of 63.2mm and height of 53.1mm, the XL coil provides a replacement option for compatible solenoid valve operators where coil bore, mounting dimensions, voltage and electrical power ratings match the original equipment.
Coil Dimensions & Mounting
The XL Series coil features a cylindrical construction with the following dimensions:
- Coil Bore: 20.8mm
- Mounting Plate Hole: 10mm
- Overall Height: 53.1mm
- Overall Diameter: 63.2mm
- Internal Body Diameter: 60.7mm
Before ordering, customers should check the existing coil's internal bore, mounting arrangement, overall dimensions and electrical specification.
Electrical Voltage & Power Options
Available electrical configurations include:
- 24V DC
- 110V AC, 50/60Hz
- 230V AC, 50/60Hz
Electrical power consumption varies according to the selected voltage and coil winding.
Listed power ratings include:
- 12V DC: 60W
- 24V DC: 36W
- 110V AC: 11W
- 230V AC: 22W
The appropriate voltage and power rating must be selected to match the intended solenoid valve application.
Insulation & Electrical Protection
The XL Series uses Class H insulation and a metal-covered cylindrical coil construction.
- Insulation Class: H
- Ingress Protection: IP54
- Electrical Connection: Flying leads
- Coil Type: Round XL Series
The flying-lead connection arrangement allows electrical installation without a conventional DIN plug connector.
Suitable cable termination and environmental protection should be provided during installation.
Duty Rating & Steam Applications
The XL Series coil is intended for compatible industrial solenoid valve applications.
The existing manufacturer information specifies a 100% duty rating for general applications, with restrictions for certain steam solenoid valves.
For specified steam valve applications, the coil must not exceed a 90% duty cycle and requires a maximum five-minute power-off interval.
An alternative LP low-power coil series is available for continuous-duty steam applications up to 3 bar.
The correct duty rating must be confirmed against the complete solenoid valve assembly before installation.
Replacement Coil Selection
When selecting a replacement solenoid coil, confirm:
- Coil bore and mounting dimensions
- Supply voltage and frequency
- Electrical power consumption
- Insulation class
- Duty rating
- Connection type
- Compatibility with the existing solenoid valve operator
A physically similar coil is not necessarily electrically or mechanically interchangeable.
Typical Applications
- Industrial solenoid valve maintenance
- Steam solenoid valve replacement coils
- Industrial water control systems
- Pneumatic and fluid control equipment
- Industrial process machinery
- OEM solenoid valve assemblies
- Electrical valve repair and servicing
Technical Specification
Brand: Di-Hen Mit-UNI-D-CNS
Model: COIL-XL
Product Type: Replacement solenoid coil
Coil Type: Round XL Series
Coil Bore: 20.8mm
Mounting Plate Hole: 10mm
Overall Height: 53.1mm
Overall Diameter: 63.2mm
Internal Body Diameter: 60.7mm
Voltage Options: 24V DC, 110V AC, 230V AC
Frequency: 50/60Hz AC
Power Consumption: Voltage dependent
Insulation Class: H
Ingress Protection: IP54
Electrical Connection: Flying leads
Duty Rating: Application dependent
Free next day UK delivery.
Related Products & Categories
Replacement Solenoid Coils
Valve Seal Kits & Armatures
Di-Hen Pro-Uni-D-cns Product Range
Technical Specification
Brand: Di-Hen miT-UniD-cns
Model: COIL-XL
Width: 63.20 mm
Height: 53.10 mm
Depth: 63.20 mm
Weight: 0.86 kg
Valve / Product Type: Solenoid Valve
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC
Approvals:: IP54
Spares (Coils, Connectors, Seals): Coil bore 20mm
Found in these Categories
Solenoid Coil Core 20.8/10mm H 53.1mm W 53.2mm L 53.2mm 36W
£47.33 incl. VAT £39.44 ex. VAT
-43% Was £83.26 incl. VAT