Description
DIN Form B Industrial 11mm Connector 0–250V 10A
Nass Magnet DIN Form B Industrial electrical connector with 11mm contact spacing, designed for field wiring to solenoid valves and other electromagnetic devices using the Industrial Form B connection.
This standard no-circuit connector contains no LED, VDR, diode or rectifier, making it suitable for a broad 0–250V AC/DC operating range when used with an appropriately rated solenoid coil and electrical supply.
With a maximum operating current of 10A, M16 × 1.5 cable entry and 0.5–1.5mm² conductor capacity, it provides a robust general-purpose electrical connection for industrial solenoid valve applications.
Electrical Specification
Connector type: Form B Industrial
Contact distance: 11mm
Connection: 2P + PE
Protective earth position: 12h
Voltage range: 0–250V AC/DC +15%
Maximum operating current: 10A
Internal circuit: None
LED: None
VDR / Varistor: None
Contacts: CuZn, tin plated
Contact resistance: <15mΩ
Conductor cross-section: 0.5–1.5mm²
The absence of voltage-specific electronics is what allows this connector to be used across a broad voltage range; the connected solenoid coil must still be correctly rated for the actual supply voltage.
M16 × 1.5 Cable Entry
Cable gland thread: M16 × 1.5
Suitable cable diameter: 4–6mm
Cable gland material: PA6 GF30
Cable gland tightening torque: 1.8 ±0.2Nm
Field Wireable Connection
The removable terminal block accepts conductors from 0.5–1.5mm², allowing the connector to be wired on-site to suit the installation.
Nass recommends the use of wire-end sleeves / ferrules for the conductor termination.
No Internal Circuit
This version provides a straightforward electrical connection without additional electronic components.
There is:
✓ No LED
✓ No VDR / varistor
✓ No diode
✓ No bridge rectifier
This makes it particularly useful where indication or suppression is already provided elsewhere in the control system, or where a simple general-purpose DIN connector is required.
Construction & Materials
Housing: One-piece
Housing material: PA6 GF30
Housing colour: Black
Terminal block: PA6 GF30
Cable gland: PA6 GF30
Contacts: CuZn, tin plated
Gasket: Black NBR profile
Central fixing screw: M3 × 33.5mm
Screw material: Zinc-plated steel 4.8
Central screw tightening torque: 0.4 ±0.1Nm
Operating Temperature
Ambient temperature: −25°C to +90°C
RoHS: Yes
DIN Form B Industrial 11mm
This connector uses the 11mm Industrial Form B contact arrangement.
It should not be confused with the 10mm Form B analogue connector in your range. Although both are commonly referred to as DIN Form B connectors, the different pin spacing makes identifying the correct version essential.
Typical Applications
✓ Solenoid valves
✓ Pneumatic directional valves
✓ Hydraulic valves
✓ Process control valves
✓ Industrial automation
✓ OEM machinery
✓ Water control valves
✓ Air control systems
✓ Packaging machinery
✓ General industrial equipment
Why Choose the No-Circuit Form B Connector?
For applications that do not require an LED or suppression circuit, this connector provides a simple and economical 11mm Industrial Form B electrical connection.
The absence of internal voltage-specific electronics gives it broad 0–250V AC/DC compatibility, while its 10A maximum rating provides considerably greater current capacity than many LED, VDR or rectified connector variants.
Its field-wireable design also allows the installer to select the appropriate cable and conductor arrangement for the application.
Related Products & Categories
