3/4 BSP stainless ball valve WRAS Approved 10 Bar 9-24vAC/DC or 110-240vAC Open/Close + Failsafe ABVM06S

£82.09

£109.45 incl. VAT
£68.41 ex. VAT

Brand: Connexion

Model: ABVM06S

Stock: 3020 in stock

Read Full Description

Description

3/4 inch Motor Actuated WRAS Ball Valve Mini series ABVM06S ®.

Motor Actuator:
Open/Close: 4 to 6 seconds.
Includes: visual position indication.
Temperature (ambient): -15°C to +50°C.
Cycle life: 100,000+ open/close, 100% rated.
Power Consumption: 1 to 5 watts when moving.
Control options: Failsafe return or Power Open/Close.
Power supply: 9-24v 2 amp, 110-240v 500mA recommended.
Voltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.

Ball Valve:
Bore: 20.0mm
Pressure: 0 to 10 Bar
Body: 304 stainless steel
WRAS Certificate 2012107
Port 3/4 BSP, optional NPT thread
Seals: PTFE + EPDM (WRAS Approved).
Temperature (media): -15°C to +100°C.
Media: air or water suitable with 304 stainless steel, EPDM + PTFE.

Options to choose.
1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM06S/9AR + ABVM06S/2AR)

2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM06S/9AR-NO + ABVM06S/2AR-NO)

Failsafe actuators require minimum 30 second power ON for recharging.

3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.
Power to GREEN valve opens or power off valve closes. (ABVM06S/2 and ABVM06S/9)

4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.

Other options.

Manual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.
Available low voltage only. (ABVM06S/9AR-MO, ABVM06S/9AR-NO-MO, ABVM06S/9-MO)

ABVM Weather Cover (recommended for use outdoors or wet environments).

E2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.
Volt free feed back (no voltage supplied from actuator).
Switch rating 0 to 36vDC 0.4 Amp Max. (ABVM06S/9AR-E2, ABVM06S/2AR-E2, ABVM06S/9-E2, ABVM06S/2-E2)

Technical Specifications

Speed:
9-24 volt: Open 4 second / close 4 seconds
110-240 volt: Open 4 seconds / Close 6 seconds.

Start Power
9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.

Moving Power:
9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.)
110-240 volt: 2 to 5 Watts, 50 to 100mA.

Maximum Voltage:
Actuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.
Actuators with manual override can operate from 9 to 35 volts AC/DC.

Destruction Test.
On the 26th November 2020 at around 10.40am we connected an ABVM to a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)

As of 31st May 2023 the valve has opened and closed, 1,311,280 times and still opening and closing perfectly.

Technical Specification

Brand: Connexion

Model: ABVM06S

Width: 68.00 mm

Height: 83.00 mm

Depth: 72.00 mm

Weight: 0.61 kg

Body Material: Stainless Steel

Port Size: 3/4 Inch

Function: 2/2 Normally Closed, 2/2 Normally Open, Power Open/Power Close

Operation: Direct Acting

Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar

Seals: EPDM

Approvals: IP67, WRAS

Media: Water, Water (RO/Pure/Demin)

Options required: Anti Water Hammer, Bi-Directional Flow, Manual Override, Position Feedback - Closed, Position Feedback - Open + Closed, Position indication - Visual

Orifice: 20mm

Voltage: 12vDC, 12vAC, 24vDC, 24vAC, 110vAC, 230VAC

Valve / Product Type: Ball, Motor Actuated

Reviews

★★★★★5.0 / 5 6 reviews

Jose Carlos

★★★★★

Excellent product, well made, quick delivery and works perfectly. I did think these were going to be cheap and not any good as they are less than half the price of the JJ ones I buy, but I am proven wrong. Excellent. In fact you might sell more if they were more expensive (only to others though). Thanks I'll be back for more for sure. I'll open the credit account you offered too as I am told I only need to send an official purchase order to do this. Wish other suppliers were as easy to deal with. PS Thanks for the catalogue too.

Reviewed on 10/05/2018

Lydia

★★★★★

Very good valve, my engineers are delighted all 18 valves with position feed back switches fitted and working perfectly. Thank you. Lydia.

Reviewed on 16/05/2018

Steve

★★★★★

Valve arrived quickly and is better than as described. A++

Reviewed on 23/05/2020

Thomas Schubert

★★★★★

Hello, today I already received your delivery to Germany, though I ordered the day before. Unbelivable. Thank you very much for ultra quick delivery. The items arrived in good shape. Best regards Thomas

Reviewed on 04/06/2020

flinter

★★★★★

Brilliant - very compact - wras approved - great price - fast delivery - helpful staff - To be honest about as good as it could be - well done. Recomended A+

Reviewed on 15/05/2021

Ankush

★★★★★

Brilliant WRAS motor actuated ball valve, low power - low voltage - low price - ultra-compact - quick delivery and manual override facility. The 20 I purchased finished the job off perfectly, will be back for the 200 batches as discussed on credit terms. ★(¯`'•.¸(¯`'•.¸☆ Thank-you.•'´¯)¸.•'´¯)★ Thanks Ankush.

Reviewed on 20/03/2023