DN65 PN16 Flanged Gas solenoid valve EN161 0-200mBar Auto Reset Normally Closed Elektrogas (VMR72)

£351.54

£936.98 incl. VAT
£292.95 ex. VAT

Brand: Elektrogas

Model: VMR72

Stock: 5 in stock

Read Full Description

Description

21/2 inch Gas Solenoid Valve EN161 Elektrogas VMR72
Function: 2/2 way normally closed
Operation: direct acting
Port: 21/2 DN65 PN16 flange (Option ANSI150Lb)
Pressure: 0 to 200 millibar, options 500 millibar or 6 Bar
Media: Air, Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)
Certified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357
Kvs flow factor: 63.0 m³/Hr, equipped with flow rate adjustment
Body: Aluminium
Seals: NBR based rubber certified for gas (EN549)
Open/close time: <1 second
Temperature: -15°C to +60°C
Mesh filter: 600 µm protects valve seat, disc and downstream components
Gauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.
Proof of closure: 1/8BSP port to accept PCS switch fitted as standard.
Voltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC
Coil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.
Electrical safety: Class I (EN 60335-1)
Coil: Insulation Class H 200°C, thermal resistance Class F 155°C
Voltage tolerance: -15% to +10%

Coil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X

Option: Proof of closure switch (P): Mechanical closed position electrical switch PCS8.

Valves are 100% tested by computerised testing and are fully warranted.

All components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance.

The VMR72 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.

VMR1930.1812 230vAC coil VMR72 + VMR82
VMR1930.1832 110vAC coil VMR72 + VMR82
VMR1930.1852 24vAC/DC coil VMR72 + VMR82

Technical Specification

Brand: Elektrogas

Model: VMR72

Width: 190.00 mm

Height: 355.00 mm

Depth: 305.00 mm

Weight: 20.00 kg

Valve / Product Type: Flow rate control, Solenoid

Body Material: Aluminium

Voltage: 110vAC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC

Port Size: 21/2 inch Flange DN65

Function: 2/2 Normally Closed

Operation: Assisted Lift

Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar

Seals: NBR, FKM (Viton)

Approvals: ATEX Zone II GD, IP54, IP65, EAC, EN161, FM, SIL3

Media: Air, Gases (Non Aggressive), Gases (Slight Acid/Alakli), Natural Gas

Options required: Position Feedback Closed

Orifice: 65mm

Reviews

★★★★★5.0 / 5 1 reviews

Andrew Bennett

★★★★★

VMR72 Elektrogas solenoid valve. Fantastic service as always - thank you A++++

Reviewed on 22/05/2023