Valve / Product Type

Ball Valve

Motor and air actuated quarter turn 2+3 way ball valves

Condensate drain

Automated + time control drain valves

Manual + Mechanical Control

Air valves that are controlled manually and mechanically

Motor Actuated Valves

Solenoid Valve

Valves controlled by electrical signal via a solenoid or electro magnet.

Timed control

Time control valves can be set to activate according to preset intervals when power is applied.

Port Size

1/4 thread

valves with 1/4 inch threaded ports

3/8 thread

valves with 3/8 inch threaded ports

1/2 thread

valves with 1/2 inch threaded ports

3/4 thread

valves with 3/4 inch threaded ports

1 thread

valves with 1 inch threaded ports

Media

Body Material

Aluminium

Brass

Nylon

Stainless Steel

Function

2/2 Failsafe Closed

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Failsafe Open

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

Power Open/Power Close

Valve requires power to open and power to close, no power valves stays in position.

Pressure

Seals

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

HNBR

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Voltage

Approval: ATEX,WRAS,IP etc

IP65

Dust tight and protected against water jets

IP66

Dust protected and protected against powerful water jets.

IP67

Dust protected and protected against immersion in water

WRAS

WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.

Orifice

1.2mm

Valve orifice or sealing face with diameter 1.2mm

3.5mm

Valve orifice or sealing face with diameter 3.5mm

4.5mm

Valve orifice or sealing face with diameter 4.5mm

8.0mm

Valve orifice or sealing face with diameter 8mm

13mm

Valve orifice or sealing face with diameter 13mm

15mm

Valve orifice or sealing face with diameter 15mm

20mm

Valve orifice or sealing face with diameter 20mm

25mm

Valve orifice or sealing face with diameter 25mm

Operation

Assisted Lift

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow

Can control flow in both directions

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Position Feedback Closed

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position indication Visual

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Spares (Coils, Connectors, Seals)

DIN connector Form A

DIN connector Form B Industrial

Only Show Items In Stock

Hide spare parts

Timers, Timed Valves + Drains

Filters

504 IN STOCK

231 IN STOCK

19 IN STOCK

65 IN STOCK

84 IN STOCK

128 IN STOCK

28 IN STOCK

23 IN STOCK

58 IN STOCK

28 IN STOCK

59 IN STOCK

50 IN STOCK

7 IN STOCK

1 IN STOCK