Description
3/4" 16 Bar Stainless Solenoid Valve – SHAKO SPU220A-06H
The SHAKO SPU220A-06H is a high-pressure 3/4" 2/2 way normally closed zero-rated assisted-lift solenoid valve manufactured from corrosion-resistant 316 stainless steel.
Designed for compressed air, water, vacuum, light oils and compatible aggressive or high-purity process fluids, the SPU220A-06H combines zero-rated operation with high-pressure capability up to 16 Bar.
The higher-power 18.5W Class H solenoid operator provides increased magnetic force, allowing operation from zero positive pressure through to 16 Bar with either AC or DC power.
A large 20mm orifice provides approximately 72 L/min water flow at 1 Bar pressure differential. FKM (Viton) seals are fitted as standard, with NBR, EPDM and HNBR alternatives available. For AdBlue / DEF applications, select the EPDM seal configuration.
Valve Function & Operation
Function: 2/2 way normally closed
Operation: Zero-rated assisted lift
Construction: Diaphragm
Port size: 3/4" BSP
Optional threads: NPT or Rc
Orifice: 20mm
The SPU220A-06H is normally closed when electrically de-energised. Applying electrical power energises the solenoid operator and opens the valve.
Its assisted-lift construction combines direct mechanical lifting with diaphragm assistance, allowing operation from zero positive pressure without requiring the minimum differential pressure normally associated with conventional pilot-operated diaphragm valves.
The higher-power 18.5W operator provides increased magnetic force and extends maximum positive operating pressure to 16 Bar with either AC or DC power.
Pressure & Performance
Pressure range AC: 0 to 16 Bar
Pressure range DC: 0 to 16 Bar
Vacuum service: Suitable
Orifice size: 20mm
Flow rate: 72 L/min water @ 1 Bar ΔP
Opening / closing time: ≤50ms
Coil power: 18.5W
Tested and proven operating pressure: 16 Bar
The SPU220A-06H has been tried and tested to 16 Bar, providing additional practical confidence for demanding high-pressure applications.
Construction & Materials
Body: 316 stainless steel
Tube: Stainless steel
Internal components: Stainless steel
Construction: Assisted-lift diaphragm
Orifice: 20mm
Standard seal: FKM (Viton)
Optional seals:
✓ NBR
✓ EPDM
✓ HNBR
Standard shading ring: Copper
Optional shading ring: Silver
Optional: No shading ring
Installation: Coil upright
Net weight: Approximately 0.945kg
Seal & Media Selection
Correct seal selection is essential when using the SPU220A-06H with different fluids and temperatures.
FKM (Viton) – Standard:
✓ -10°C to +180°C
✓ Oils and fuels
✓ Many process fluids
✓ Higher temperatures
NBR:
✓ -15°C to +80°C
✓ Air
✓ Water
✓ Neutral gases
✓ Mineral oils
HNBR:
✓ -40°C to +150°C
✓ Air
✓ Water
✓ Oils
✓ Low-temperature service
EPDM:
✓ -5°C to +130°C
✓ Water
✓ Hot water
✓ AdBlue / DEF / AUS 32
✓ Suitable aqueous fluids
For AdBlue / DEF applications, select the EPDM seal configuration rather than the standard FKM version.
Always confirm chemical compatibility before using the valve with aggressive chemicals, fuels, oxygen or unusual process fluids.
Media Temperature
The maximum media temperature is determined by the selected seal material and suitable solenoid operator.
FKM (Viton): -10°C to +180°C
NBR: -15°C to +80°C
EPDM: -5°C to +130°C
HNBR: -40°C to +150°C
Overall available range: -40°C to +180°C
Flow Performance
Orifice size: 20mm
Flow rate: 72 L/min water @ 1 Bar ΔP
The large 20mm assisted-lift diaphragm provides high flow capacity while maintaining zero-rated operation and high-pressure capability.
Unlike conventional pilot-operated diaphragm valves, the SPU220A-06H does not require a positive inlet-to-outlet differential pressure to initiate operation.
Coil & Electrical
Coil power: 18.5W
Insulation: Class H 180°C
Duty cycle: 100% continuous
Electrical connection: DIN43650A
Protection: IP65 with connector fitted
Coil construction: Thermoset resin
The higher-power 18.5W Class H operator provides the increased magnetic force required for operation up to 16 Bar with either AC or DC power.
Voltage Options
18.5W DC options:
✓ 12V DC
✓ 24V DC
✓ 48V DC
✓ 110V DC
✓ 220V DC
18.5W AC options:
✓ 24V AC
✓ 48V AC
✓ 110V AC
✓ 230V AC 50/60Hz
RO & Pure Water Options
The 316 stainless steel construction makes the SPU220A-06H particularly suitable for RO water, demineralised water and high-purity water applications.
Alternative operator configurations include:
✓ Silver shading ring option
✓ No shading ring for DC
✓ Rectified AC/DC configuration
The standard operator incorporates a copper shading ring. Where copper contact is undesirable, SHAKO offers a silver shading-ring operator specifically for RO and pure-water applications or an operator without a shading ring for DC/rectified operation.
Special Options
✓ NPT or Rc thread options
✓ NBR seal option
✓ EPDM seal option
✓ HNBR seal option
✓ Silver shading ring
✓ No shading ring option
✓ RO / pure water configuration
✓ AdBlue EPDM configuration
✓ Alternative coil voltages
✓ High-temperature configuration
✓ Degreased configuration
✓ Oxygen-cleaned configuration
Typical Applications
✓ High-pressure fluid control
✓ RO water systems
✓ Demineralised water systems
✓ Pure water systems
✓ AdBlue / DEF with EPDM seals
✓ Vacuum systems
✓ Chemical process systems
✓ Corrosive fluid control
✓ High-pressure water systems
✓ Water treatment equipment
✓ Air and gas control
✓ Light oil systems
✓ OEM machinery
✓ Industrial automation
High Flow 16 Bar Zero-Rated Design
The SHAKO SPU220A-06H combines corrosion-resistant 316 stainless steel construction with a large 20mm zero-rated assisted-lift diaphragm and higher-power 18.5W solenoid operator.
Its 20mm orifice provides approximately 72 L/min water flow at 1 Bar pressure differential while retaining operation from zero positive pressure through to a maximum positive pressure of 16 Bar.
The principal difference between the SPU220A-06H and standard SPU220A-06 is the higher-power operator. The 18.5W configuration increases maximum positive operating pressure from 7 Bar AC / 5 Bar DC to 16 Bar with either AC or DC power.
This 16 Bar configuration has also been tried and tested in practice, making it a strong choice for applications requiring zero-rated operation, high flow, stainless steel construction and increased pressure capability.
For AdBlue / DEF service, specify EPDM seals. For RO and demineralised water, alternative shading-ring configurations are available where copper contact with the process media is undesirable.
Ordering Information
Select the required seal material, thread and voltage before adding the valve to your basket.
Available options include:
✓ 3/4" BSP thread
✓ Optional NPT or Rc threads
✓ FKM seals as standard
✓ NBR, EPDM or HNBR options
✓ EPDM configuration for AdBlue
✓ 18.5W high-power operator
✓ 16 Bar AC/DC operation
✓ RO / pure water configuration
✓ High-temperature configuration
✓ Degreased configuration
✓ AC and DC voltage options
For AdBlue / DEF / AUS 32, select the EPDM seal configuration.
For RO or demineralised water, consider the silver shading-ring or no-shading-ring operator configuration.
For oxygen service, specify the appropriate degreased configuration and confirm application requirements before ordering.
Where only 7 Bar AC / 5 Bar DC is required, the standard 15W SPU220A-06 provides the lower-power alternative.
Related Products & Categories
