DN300 PN16 Flanged 12 Gas safety shut off valve EN161 600mBar (VMH912)

£6,143.20

£19,959.14 incl. VAT
£5,119.33 ex. VAT

Brand: Elektrogas

Model: VMH912U

Stock: 2 in stock

Read Full Description

Description

DN300 12 inch PN16 Flanged Gas safety shut off valve Elekrogas VMH912U.
Function: 2/2 way normally closed
Operation: Safety shut off valves for gas with hydraulic actuator. When energised the oil pump lifts the piston, the piston opens against the combined force of spring and gas pressure. If the power is removed , the relief valve opens quickly shutting the valve. Actuator LED: visual LED confirmation that unit is electrically energised.
Port: 12 inch DN300 PN16 flange ISO7005
Certified: EN161 Class A group 2 back pressure sealing compliant for natural gas, CE Certificate 0063C01798, Gas appliance EU directive 2009/142/EC by Kiwa, PED 2014/68/UE (ex 97/23/CE) by CSI Spa.
Media: air and non-aggressive gases included in the 1, 2 and 3 families (EN 437), option (J) Biogas and (K) coke oven gas.
Body: Aluminium
Seals: NBR, FPM and PTFE
Pressure: 0 to 600 milliBar.
Kvs Flow factor: 970.0 cubic meters an hour
CPI Switch: closed position indication feed back switch (included)
Voltage: 230vAC is standard, option 110vAC
Coil: 20VA holding, inrush 110 Watt,
Coil duty: 15 cycles per hour Max
Opening time: 45 to 75 Seconds
Coil option: ATEX Ex-proof for hazardous area zone 2 according to ATEX 94/9/EC directive.
Duty: Qualified for continuous service (100% ED).
Protection: IP65 DIN43650A ISO 4400 plug to EN60529
Auxiliary ports: G1/4 pressure gauge on two sides in both inlet and outlet chamber to connect manometers, pressure switches, leakage tester or other gas equipment.
Filter: 600μm incorporated fine mesh filter protects the valve seat and disc as well as downstream components.

The VMH912U is a safety shut off valve for gas with hydraulic actuator and are suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns and others gas consuming equipment.
The valve is open only when energized: if, for any reason, power supply goes down, the valve closes immediately (intrinsic safe),

All components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical sturdiness, sealing and resistance to corrosion of the components.
Valves are 100% tested and fully warranted.

Outdoor use: Please ensure that installing area is protected from rain and water splashes or drops. (See full data sheet Page 12)

Technical Specification

Brand: Elektrogas

Model: VMH912U

Width: 305.00 mm

Height: 536.00 mm

Depth: 200.00 mm

Weight: 116.00 kg

Valve / Product Type: Motor Actuated

Body Material: Aluminium

Voltage: 110vAC, 230VAC

Port Size: 12 inch Flange DN300

Function: 2/2 Normally Closed

Operation: Direct Acting

Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar)

Seals: NBR, FKM (Viton)

Approvals: ATEX Zone II GD, IP65, EN161

Media: Air, Gases (Non Aggressive), Gases (Slight Acid/Alakli), Natural Gas

Options required: Position Feedback Closed

Orifice: 300mm