Key Features
✓ 3/8" BSP female port
✓ 2/2 way normally closed operation
✓ Pressure-assisted diaphragm design
✓ High-flow 13.0mm orifice
✓ Kv 40 L/min flow capacity
✓ 0.5 to 10 Bar operating pressure differential
✓ 15 Bar maximum working pressure
✓ Brass body with stainless steel internals
✓ NBR seals as standard
✓ EPDM, FKM (Viton®) or HNBR seal options
✓ Suitable for air, water, oil and compatible fluids
✓ Temperature options from -40°C to +180°C depending on seals
✓ IP65 DIN43650A coil system included
✓ Class H, 100% continuous duty coil
✓ Multiple AC and DC voltage options
✓ Optional ATEX hazardous area coil
✓ Optional degreased version available
✓ Free UK delivery available
3/8" Brass Solenoid Valve 0.5-15 Bar 2/2 Way Normally Closed
★★★★★
5.0 / 5
(1 review)
£53.36
incl. VAT
£44.47
ex. VAT
-40% Was £88.96 incl. VAT
Select Thread Type
3/8 BSP (G)
3/8 NPT (N) +£5.36
Select Seal Material
NBR
Viton (V) +£9.90
EPDM (E) +£9.90
HNBR (H) +£9.90
Select Coil
15 Watt IP65 (17-23VA) 22003
10.1W ATEX EExmIIT4 II 2G & 2D IP65 T130C (22003EX) +£106.58
8W ATEX Ex db IIC T6/T5 IP66/67 Ali (34-III-8W) +£272.28
Select Voltage
6vDC £0.00
12v DC
24v DC
48v DC
12v AC 50/60Hz
24v AC 50/60Hz
48v AC 50/60Hz
110v AC 50/60Hz
230v AC 50/60Hz
380v AC 50/60Hz
12vDC ATEX £0.00
24vDC ATEX £0.00
24vAC 50/60Hz ATEX £0.00
110vAC 50/60Hz ATEX £0.00
230vAC 50/60Hz ATEX £0.00
24vAC/DC ATEX EXD £0.00
110vAC/DC ATEX EXD £0.00
230vAC/DC ATEX EXD £0.00
Select DIN Connector *Voltage required*
Included ATEX Coil with 3mtr cable
Form A square no circuit (DIN2)
Form A with LED (DIN2-LED) +£3.86
Form A with Rectifier converts AC to DC (DIN2R-ALL) +£7.56
M20x1.5mm Conduit Entry Horizontal £0.00
Select Degreased for oxygen use
Not required £0.00
Degreased +£24.00
Please select all the options above.
Free UK delivery — order by 6pm for dispatch within 1–2 working days
14-day free returns
Secure checkout
Genuine Shako Co Ltd product
Description
3/8 brass solenoid valve Shako PU225A-03 designed for high-flow air, water and light fluid control applications.
A high-flow, pressure-assisted 3/8 inch 2/2 way normally closed brass solenoid valve designed for applications where a minimum pressure differential is available. Suitable for air, water, oils and compatible gases, with optional degreasing and ATEX options.
Valve function and operation
Function: 2/2 way normally closed
Operation: Pressure assisted
Minimum operating pressure: 0.5 bar differential
Differential pressure range: 0.5 to 10 bar
Maximum working pressure: 15 bar
Ports and flow
Port size: 3/8 inch BSP
Optional threads: NPT
Orifice size: 13.0 mm
Kv flow factor: 40 L/min based on water with 1 bar pressure drop
Construction and materials
Body material: Brass
Internal components: Stainless steel
Seal material (standard): NBR
Optional seals: EPDM, Viton or HNBR
Media & Temperature
Media: Air, water, oil, and compatible fluids under 50 CST
Temperature Range:
NBR: -15°C to +80°C
Viton: -10°C to +180°C
EPDM: -5°C to +130°C
HNBR: -40°C to +150°C
Coil and electrical
Coil power: 15 W
Magnet class: H
Connector type: DIN 43650A
Protection rating: IP65 (connector included)
Duty cycle: 100% rated
Voltage options
6V DC, 12V DC, 24V DC, 48V DC, 110V DC, 220V DC
12V AC, 24V AC, 36V AC, 48V AC, 110V AC, 230V AC, 380V AC 50/60 Hz
ATEX / IECEx Coil Option
Optional nass magnet explosion-protected solenoid operator available.
✓ Ex mb IIC T4 Gb
✓ Ex mb tb IIIC T130°C Db
✓ Suitable for Zone 1 gas and Zone 21 dust hazardous areas
✓ ATEX Category 2G / 2D
✓ Protection rating: IP65
✓ Maximum media temperature: +80°C
✓ ATEX Certificate: PTB 03 ATEX 2086 X
✓ IECEx Certificate: IECEx PTB 05.0005X
✓ ATEX Directive: 2014/34/EU
Additional options
Degreased version available with all oil and grease removed
HS code 84818030
Typical applications
Industrial process control
Water and fluid handling
Chemical and general-purpose systems
Hazardous area installations
Related Products & Categories.
DIN43650 Electrical Connectors
Solenoid Valve Coils & Magnets
Solenoid Spares: Seals & Diaphragms
